Troubleshooting; Ordering Replacement Parts - EINHELL NLE 20 E Anleitung

Anleitung NLE 20 E_SPK7
GB

Troubleshooting

The unit fails to start:
- Check whether the power plug is correctly
inserted.
- Check whether there is any electricity.
- Is there a power failure?
- Is the red lamp on the water level indictor
shining? If it is, either the tank is full and must
first be emptied or the tank is not correctly
inserted.
The unit seems to be having no effect:
- Is the filter dirty or contaminated?
- Is the air inlet or outlet blocked?
- Is the humidity in the room already very low?
The unit seems to be having very little effect:
- Are too many doors and windows open?
- Is there anything in the room which is creating
a great deal of humidity?
The unit is very loud:
- Is the unit standing insecurely or at any angle,
resulting in vibrations?
- Is the floor uneven?
Important! Never attempt to repair the device
yourself. Always seek the assistance of your
customer services dealer.

Ordering replacement parts

Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
Circuit diagram (see Fig. 5)
10
18.09.2006 15:59 Uhr Seite 10