Maintenance And Servicing - Bosch PCM 8 Originalbetriebsanleitung

Working on mouldings (base or crown
mouldings)
Mouldings can be sawn in two different ways:
Positioning of Base moulding
workpiece
– Placed against
the fence
– Lying flat on the
saw table
Always check the set mitre and/or bevel angle first by mak-
ing trial cuts in scrap wood.
Transport
Before transporting the power tool, the following steps must
be carried out:
– Bring the power tool into the transport position.
– Remove all accessories that cannot be securely fitted to
the power tool.
If possible, transport unused saw blades in an enclosed
container.
– To lift or transport the power tool, hold it by the recessed
handles (13) on either side of the saw table (12).
Only use the transport devices to transport the power
u
tool and never the protective devices.

Maintenance and Servicing

Maintenance and Cleaning
Pull the plug out of the socket before carrying out any
u
work on the power tool.
To ensure safe and efficient operation, always keep
u
the power tool and the ventilation slots clean.
In order to avoid safety hazards, if the power supply cord
needs to be replaced, this must be done by Bosch or by a
customer service centre that is authorised to repair Bosch
power tools.
Cleaning
The retracting blade guard must always be able to move
freely and retract automatically. It is therefore important to
keep the area around the retracting blade guard clean at all
times. Remove dust and chips by blowing out with com-
pressed air or using a brush.
Clean the guide roller (17) regularly.
Accessories
Saw blades for wood
216 x 30 mm saw blade, 24 teeth
Bosch Power Tools
216 x 30 mm saw blade, 48 teeth
Saw blades for hardwood and composites
Crown moulding
216 x 30 mm saw blade, 60 teeth
After-sales service and advice on using products
Our after-sales service can answer questions concerning
52°
product maintenance and repair, as well as spare parts. You
can find exploded drawings and information on spare parts
at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the type plate of
the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or ar-
range the collection of a product in need of servicing or re-
pair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch-pt.com.au
www.bosch-pt.co.nz
Article number
Republic of South Africa
Customer service
2 608 640 431
Hotline: (011) 6519600
English | 25
Article number
2 608 640 432
2 608 640 433
1 609 92A 4DU | (20.06.2018)