Renkforce DL-PAR106 LED-Spot 5 x 3 W Bedienungsanleitung Seite 34

Overview of the setting options for the operating mode
Symbol Option1
Addr 001-512
ChNd 1Ch-7Ch
SLNd NASt
SLAU
ShNd SoUn
SPee
NAnU
CoLo
FAde
AUto
LED on
oFF
dISP dISP
dSIP
Ir on
oFF
The speed is always set from slow to fast.
34
Option2 Function
DMX starting address
DMX operation with 1-7 channels
Operation as a master device
Operation as a slave device
So01-So27 27 different sound-to-light effects
SP01-SP99 Speed settings for Sound-to-Light/Automatic Mode/Fade effects
bLue Manual colour operation > b 0 - b255 > brightness blue
Gree Manual colour operation > G 0 - G255 > brightness green
red Manual colour operation > r 0 - r255 > brightness red
oFF/on Manual colour operation > off/on
FLAS Manual colour operation > FS 0 strobe off
Manual colour operation > FS 1 - 15 strobe speed
Co01-Co32 Pre-programmed colours (32 different ones)
FLAS Pre-programmed colours > FS 0 strobe off
Pre-programmed colours > FS 1 - FS15 strobe speed
FA 0-FA 9 10 different fade effects
AU01-AU23 23 different automatic programmes
Display permanently on
Display switches off at standby
Display aligned normally
Display alignment turned by 180°
IR remote control active
IR remote control deactivated