Cleaning And Care - Silvercrest SEAS 20 A1 Bedienungsanleitung

Scissor sharpening
If you have selected the setting "Scissor sharpening"
• Sharpen both scissor blades one after the other. For this, open the scissors
out and draw both blades, one after the other, through the guide.
Flat-head screwdriver
Should you wish to grind a slot-screwdriver
• This is possible in every position of the function and protective cap
Appropriate to its width, insert the screwdriver through one of the two grin-
ding openings
end face of the screwdriver will now be ground level and flat.
Grinding directly on the grindstone
Certain edges can possibly be more easily sharpened directly on the grind-
t
stone , without the function and protective cap
function and protective cap
• Turn the function and protective cap
You can now take off the function and protective cap
• To replace the function and protective cap
is once again at the top. You can now push the function and protective
y
cap on and secure it by turning it to the left or right.

Cleaning and Care

To avoid risks of personal injury and damage:
• Before carrying out any maintenance work, first remove the plug from the
wall socket.
• NEVER submerse the appliance in water or other liquids! These could
damage the appliance. Additionally, there is a potentially fatal risk of
electric shock should moisture come into contact with electrical components.
r
on the front of the function cap (see fold-out side). The
y
is removable (Fig. F):
e
r
flat (Fig. E):
y
: For these cases, the
y
until the arrow
y
, hold it so that the arrow
- 7 -
(Fig. D):
y
is at the top.
y
.
.