Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Care; Cleaning The Spray Bottle; Washing The Microfibre Cover; Cleaning The Appliance - Silvercrest SFR 3.7 B2 Bedienungsanleitung

Akku-fenstersauger
Vorschau ausblenden Andere Handbücher für SFR 3.7 B2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

To charge the appliance, connect the charger
to a mains socket and insert the connecting jack
into the charging socket
The indicator light
When the appliance is fully charged, the indicator
light
lights up green.
NOTE
Only recharge the batteries when the suction
power of the appliance is noticeably weaker
and the red indicator light

Cleaning and care

DANGER – ELECTRIC SHOCK!
Prior to cleaning, disconnect the appliance
from the charger
ATTENTION! DAMAGE TO PROPERTY!
Do not use abrasive or aggressive cleaning
materials. These could damage the surface
of the appliance!

Cleaning the spray bottle

Open the spray bottle and empty contents.
Remove the microfibre cover
Wipe the components of the spray bottle with
a damp cloth; if necessary, use a little mild deter-
gent on the cloth.
Washing the microfibre cover
The microfibre cover
washed at 60°C. Do not use any fabric
conditioner as this significantly reduces the
cleaning power of the microfibres.
Do not bleach the microfibre cover
Do not tumble dry the microfibre cover
Do not iron the microfibre cover
SFR 3.7 B2
on the motor unit
lights up red.
is flashing red.
! Risk of electric shock!
.
can be machine-
!
!
Material: 85% polyester / 15% cotton

Cleaning the appliance

.
For thorough cleaning, disassemble the appliance:
1) Press the ridged area on the underside of
vacuum attachment
attachment
vacuum attachment
required, use some mild detergent on the cloth.
Press the release button
container
Turn the blue nozzle
container
Now you can pull the blue rod downwards out of
the dirt container
Rinse the dirt container
necessary, with a mild detergent.
2) Wipe the motor unit
If required, use some mild detergent on the
cloth. Dry the motor unit
3) Then reassemble the appliance:
Push the blue rod back into the dirt container
Make sure that you insert the blue rod correctly:
the slanting side of the blue rod
be aligned with the slanted side of the dirt
container
!
and pull the vacuum
off the appliance. Clean the
with a damp cloth. If
and remove the dirt
from the motor unit
.
at the top end of the dirt
slightly anticlockwise and lift it off.
.
with fresh water and, if
off with a damp cloth.
.
:
GB
.
must
 37

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis