Silvercrest SGP 28 A1 Bedienungsanleitung Seite 12

Fitting/removing the pattern discs
NOTE
You can use the pattern discs w to form the dough into diff erent shapes which
can then be baked into cookies with varying appearances.
When the pusher 6 and container 7 are assembled:
1) Select the desired pattern disc w.
2) Place the pattern disc w into the locking ring q so that the smooth, un-
labelled side of the pattern disc is facing outward.
3) Place the locking ring q with the pattern disc w onto the container 7.
4) Hold the container 7 fi rmly and turn the locking ring q until it is fi rmly
seated.
To remove the pattern disc, unscrew the locking ring q and remove it and the
pattern disc w from the container.
Fitting/removing the nozzles
NOTE
You can use the nozzles 9 to shape the decoration substance into various
forms.
When the pusher 6 and container 7 are assembled:
1) Place the nozzle adapter 8 into the locking ring q. The thread must be
facing outwards.
2) Place the locking ring q with the nozzle adaptor 8 onto the container 7.
3) Hold the container 7 fi rmly and turn the locking ring q clockwise until it is
fi rmly seated.
4) Select a nozzle 9.
5) Place the nozzle 9 onto the nozzle adapter 8.
6) Screw the adapter lock 0 over the nozzle 9 on the nozzle adapter 8.
To remove the nozzle 9, unscrew the adapter lock 0 and remove it and the
nozzle 9 from the container. Unscrew the locking ring q and remove this and
the nozzle adapter 8 from the container.
SGP 28 A1
GB
9