Daily Use; The Heat Setting; Using The Cooking Zones; Bridge Function - Electrolux EHL6740XOK Benutzerhandbuch

8 www.electrolux.com
3.4 OptiHeat Control (3 step
Residual heat indicator)

4. DAILY USE

4.1 Activating and deactivating
Touch
deactivate the hob.
4.2 Automatic Switch Off
The function deactivates the hob
automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after
you activate the hob,
• you spill something or put something
on the control panel for more than 10
seconds (a pan, a cloth, etc.). An
acoustic signal sounds and the hob
deactivates. Remove the object or
clean the control panel.
• the hob gets too hot (e.g. when a
saucepan boils dry). Let the cooking
zone cool down before you use the
hob again.
• you use incorrect cookware. The
symbol
zone deactivates automatically after 2
minutes.
• you do not deactivate a cooking zone
or change the heat setting. After some
time
deactivates.
The relation between the heat setting
and the time after which the hob
deactivates:
• , 1 — 3 6 hours
• 4 — 7 5 hours
• 8 — 9 4 hours
• 10 — 14 1.5 hours
WARNING!
/ / There is a risk of
burns from residual heat. The
indicator shows the level of
the residual heat.
WARNING!
Refer to Safety chapters.
for 1 second to activate or
comes on and the cooking
comes on and the hob
The induction cooking zones make the
heat necessary for cooking process
directly in the bottom of the cookware.
The glass ceramic is heated by the heat of
the cookware.

4.3 The heat setting

To set or change the heat setting:
Touch the control bar at the correct heat
setting or move your finger along the
control bar until you reach the correct heat
setting.

4.4 Using the cooking zones

Put the cookware on the cross / square
which is on the surface that you cook.
Cover the cross / square fully. Induction
cooking zones adapt to the dimension of
the bottom of the cookware automatically.
You can cook with the large cookware on
two cooking zones at the same time.

4.5 Bridge function

This function connects two cooking zones
and they operate as one.
First set the heat setting for one of the
cooking zones.
To activate the function for left / right
cooking zones: touch
change the heat setting touch one of the
left / right control sensors.
/ . To set or