Disposal of packaging
The packaging protects the device from damage during transport . The packaging
materials have been selected for their environmental friendliness and ease of
disposal, and are therefore recyclable .
Returning the packaging to the material cycle conserves raw materials and
reduces the amount of waste that is generated . Dispose of packaging materials
that are no longer needed in accordance with applicable local regulations .
Dispose of the packaging in an environmentally friendly manner .
Note the labelling on the packaging and separate the packaging material com-
ponents for disposal if necessary . The packaging material is labelled with abbre-
viations (a) and numbers (b) with the following meanings:
1–7: plastics
20–22: paper and cardboard
80–98: composites
NOTE
►
If possible, keep the original packaging for the complete warranty period
of the device so that the device can be packaged properly for return ship-
ment in the event of a warranty claim .
Requirements for the set-up location
For safe and trouble-free operation of the device, the set-up location must fulfil
the following requirements:
■
Place the device on a firm, flat and level surface .
■
The surfaces of some items of furniture might contain components that can
corrode and soften the rubber feet of the device . If necessary, place a mat
under the device's rubber feet .
■
Do not place the device in a hot, wet or extremely damp environment or in
the vicinity of flammable materials .
■
The USB power supply must be easily accessible so that the USB cable
of the device can be quickly disconnected in an emergency .
Connecting the power supply
NOTE
►
The device consumes around 100 mA of power .
►
The USB power supply should ideally be at least 900 mA . This can usually
be supplied, for example, via a USB 3 .0 port on your computer .
♦
Connect the USB cable
port (type A) on your computer .
■
6
│
GB │ IE │ NI
8
to the USB IN connection
8
0
and to a free USB
SDOH 3.0 A1