Installation And Connection; Installation Planning; Protective Measures - Oase ProfiClear Premium Gebrauchsanleitung

- GB -
5

Installation and connection

A, B, C
Important: If the planned installation deviates significantly from the recommendations contained in this
manual:
Have your specialist retailer check whether all technical specifications were adhered to. This is
►
crucial for a problem-free operation.
5.1

Installation planning

F
Attention! Dangerous electrical voltage.
Possible consequences: Death or serious injuries due to operation of electrical units or installations in
or near swimming ponds.

Protective measures:

Only use electrical units or installations with a rated voltage of U
►
Observe a distance of 2 m from swimming ponds for operating electrical units or installations with a
►
rated voltage of U
Adhere to national and regional regulations.
►
Note:
Use suitable transport and lifting aids to transport and install the unit.
The unit weighs more than 25 kg (→ Technical Data).
Plan the installation of the filter system. With careful planning, taking the ambient conditions into
account, you will obtain optimum operating results.
The following conditions must be met:
As the filter modules are very heavy when filled, they must be placed on a suitable base (at least on
►
slabs, but preferably on a poured concrete base) to prevent them from subsiding.
Plan sufficient space for carrying out cleaning and maintenance work.
►
Drain the dirty water into the drain or far enough away from the pond so that it cannot flow back into
►
the pond.
If the coarse soiling and dirty water both run into the same pipe, it is important to use at least DN
−
110 pipes.
Note:
A water course or waterfall guarantees optimum water return to the pond.
In this way, the filtered pond water is enriched with oxygen before it is returned to the pond.
46
30648-08-13_GA_ProfiClear_Premiu46 46
> 12 V or U >30 V.
AC DC
≤ 12 V or U ≤30 V.
AC DC
21.08.2013 10:23:04