Special Functions - Grundig WTR 3000 BT Bedienungsanleitung

TIMER­MODE
Sleep­Timer
The device has a sleep timer which switches off
in radio mode at a preset time. It is possible to
adjust the sleep time between 90 and 15 minutes
in 15 minute increments.
Select­the­switch-off­time­for­the­
sleep­timer
1 Press »ON/OFF« to switch on the device.
2 Press sleep logo to adjust the sleep time.
– Display: »Sleep Timer Off«
SPECIAL­FUNCTIONS
Set­the­display­illumination
1 Open the menu with »Menu«.
2
Select the option »S y stem« with »
confirm by pressing »OK/i«.
3
Select the option »Backli g ht« with »
and confirm by pressing »OK/i«.
4 Press »Menu« to end the setting.
Set­the­display­contrast­
This can be optimized by the contrast depending
on the angle of display.
1 Open the menu with »Menu«.
2 Select the option »S y stem« with »
confirm by pressing »OK/i«.
3
Select the option »LCD contrast« with »
« and confirm by pressing »OK/i«.
e
4 Select the contrast with »
pressing »OK/i«.
5
Press »Menu« to end the setting.
­--------------------------------------------------------------------------------------------------------------------------
­--------------------------------------------------------------------------------------------
­
« and
r e
­
«
r e
­ « and
r e
­
r
­ « and confirm by
r e
3
Set the switch-off time with »
increments) and confirm by pressing »OK/i«.
– Display: » «.
Notes:
You can set the switch-off time also by press-
7
ing » « (in 15 minutes increments).
Switch­off­the­sleep­timer
1
To switch off the sleep timer earlier, press sleep
logo and adjust to »Sleep Timer Off«
and confirm by press »OK/i«.
Call­up­the­software­version
1 Open the menu with »Menu«.
2
Select the option »System
­
with » « and confirm by pressing »OK/i«.
r e
3
Select the option »Software Ver.« with
­
» « and confirm by pressing »OK/i«.
r e
– Display: actual software version.
4 Press »Menu« to end the display.
Deleting­all­settings­(Reset)
This function enables you to reset all the custom
settings back to the default settings. All setings are
lost when you do this.
1 Open the menu with »Menu«.
2 Select the option »S y stem« with »
confirm by pressing »OK/i«.
3
Select the option »Factor y Reset« with
­
» « and confirm by pressing »OK/i«.
r e
– A safety confirmation is displayed.
4 Select the option »Yes« with »
5 Press »OK/i« to confirm setting.
­
« (in 15 minutes
r e
Settings«
­ « and
r e
«.
e
ENGLISH
13­ ­