Bluetooth Mode - Grundig WTR 3000 BT Bedienungsanleitung

BLUETOOTH­MODE
Bluetooth­device­compatibility
Your WTR 3000 BT connects with all Bluetooth
devices that support the A2DP profile including
the most smartphones, laptops and tablets.
Selecting­the­input­source­Bluetooth
1
Select the input source Bluetooth with
AL«.
– Display: »Bluetooth« and
»Searchin g «.
Pairing­Bluetooth­device
1
Activate on the Bluetooth device the Bluetooth
function.
2 Start on the Bluetooth device the search func-
tion.
– After a short period of time, your Grundig
WTR 3000 is displayed on the Bluetooth de-
vice.
3
Select the Grundig WTR 3000 on the Blue-
tooth device and connect it.
4 Once the Bluetooth device is connected to
your device, the WTR 3000 BT will display
»Bluetooth« and »Connected«.
Note:­
Although the WTR 3000 BT can only stream
7
audio from one device at a time, it is capable
of being paired with up to eight devices.
Connecting­a­paired­Bluetooth­
Device
Notes:­
You will only need to pair your Bluetooth de-
7
vice with the unit one time.
The next time your Bluetooth device and the
7
WTR 3000 BT are in range of each other,
and the Bluetooth feature is turned on, they
will automatically connect.
The WTR 3000 BT will only automatically
7
connect to the last Bluetooth Device it was con-
nected to.
­---------------------------------------------------------------------------------------------------
If your paired device does not automatically
7
connect, navigate to the Bluetooth menu on
your device and select the unit from the list.
Play­Audio­signal­from­your­Blue-
tooth­device
1
Start playback on the Bluetooth Device.
2 Adjust the volume using »–­­+«.
3
End playback on the Bluetooth Device.
Notes:­
»Mode/
Various functions may also be controlled
7
from the WTR 3000 BT. Select Playback-
Pause using
again to resume playback; select previous ti-
tle by pressing »
ing »
Keep in mind that depending on the used
7
Bluetooth device and the structual conditions
the wireless range can be up to 9 m.
Disconnect­the­Bluetooth­device
1
Switch off the Bluetooth function at the Blue-
tooth device or long press »OK/i« button.
– Display changes to: »Searchin g «.
Reconnecting­the­Bluetooth­device
1 If you move out of range or turn off the Blue-
tooth feature on your device, the unit will dis-
connect from your device.
2 To reconnect, simply access the Bluetooth
Manager on your Bluetooth device and select
the Grundig WTR 3000.
Note:­
In case of the registered Grundig WTR
7
3000 cannot connect to the Bluetooth de-
vice again, please remove the Grundig WTR
3000 from the Bluetooth device list, search
and connect again.
Automatic­shutdown
If Bluetooth is selected as input source and no
Bluetooth device is connected, the WTR 3000 BT
switches automatically to Stand-by mode after 15
minutes.
»5+­ ­ II« , press
e
«, select next title by press-
r
«.
e
ENGLISH
»5+­ ­ II«
e
11­ ­