General Functions; Automatic Shutdown - Grundig RCD 5050 Bedienungsanleitung

GENERAL FUNCTIONS

Switching on and off
1
Switch on or off the device with »
Selecting the input source
1
Select the input source (CD, SD, CD, Radio
or Aux) with »CD/SD/USB«,
»AUX«.
Adjusting the volume
1 Adjust the volume with
DOWN«.
Selecting sound settings
You can choose between the preset sound
settings.
1
Select the sound setting using »DSC«.
Changing the "USER" sound set-
ting
You can change the »USER« sound setting.
1
Select the »USER« sound setting by pressing
»DSC«.
2 Press and hold »DSC«.
– Display: »BASS 0«.
3 Set the bass with »
8
with »DSC«.
– Display: »TRE 0«.
4
Set the treble with »
firm with »DSC«.
8 «.
»RADIO or
»VOLUME UP
« or » « and confirm
9
« or » « and con-
8 9
---------------------------------------------------------------------------------------
Listening with headphones
1
Connect the headphones to the »
phone jack (ø 3.5 mm).
– This switches off the loudspeakers.
Caution:
Excessive sound pressure from the ear-
7
phones or headphones can cause hearing
loss.

Automatic shutdown

1
The device switches automatically to Stand-by
mode after 15 minutes if:
– the device is in the stop position;
– there is no plug connected to the
IN«.
2 For further using switch on the device again.
Listening to an external source
You can listen to the sound of the connected
external device (e.g. a MP3 player) through
your system's speakers.
Note:
The external device must be connected to
7
IN« socket.
the »AUX
1
Switch on the device with »
2 Select the input source with »AUX«.
3 Start playback on the external device.
« head-
0
»AUX
8 «.
ENGLISH
18