General Functions; Radio Mode; Stereo/Mono Reception - Grundig RRCD 1400 Handbuch

GENERAL FUNCTIONS

Switching on and off
1 Switch on the device with the input source by
moving the »CD TAPE/OFF
to the required position.
2 »CD TAPE/OFF
Move the
to the »TAPE/OFF« position to switch off the
device.
Selecting the input source
1
Select the input source (CD, TAPE or RADIO)
»CD TAPE/OFF
using
Adjusting the volume
1
Adjust the volume with

RADIO MODE

Antenna
1 For FM (VHF) reception, extend the telescopic
antenna.
Note:
If the FM signal is too strong, it is advisable
7
to push in the telescopic antenna.
Selecting the radio input source
1 »CD TAPE/OFF
Move the
the »RADIO« position.
Selecting radio stations
1
Select the radio station using »TUNING«.
20 ENGLISH
RADIO« switch
RADIO« switch
RADIO«.
+
»– «.
ß
------------------------------------------------------------------------------------------------------------------------
RADIO« switch to
---------------------------------------------------------------------------------------
Switching the Ultra Bass System
on and off
This function boosts the bass frequencies.
1
Switch the Ultra Bass System on and off by
pressing »UBS«.
Listening with headphones or
earphones
1 Insert the headphone plug (ø 3.5 mm) into the
» « socket on the left of the device.
0
– This switches off the loudspeakers.
Note:
Prolonged listening with the head phones
7
or ear phones at loud volumes can damage
your hearing.

Stereo/mono reception

If the device receives an FM stereo station,
ST ●« lights up green. However, if the signal from
the FM stereo station is weak, you can improve
the sound quality by switching to mono reception.
1 Press »MONO STEREO« to mono reception.
2
Press »MONO
reception.
STEREO« to switch to stereo
»FM