Dometic M9LQ Bedienungsanleitung Seite 38

Safety and installation instructions
If you disconnect the negative terminal of the battery, all data stored in the
volatile memories will be lost.
• The following data must be reset, depending on the vehicle equipment
options:
– Radio code
– Vehicle clock
– Timer
– On-board computer
– Seat position
You can find instructions for making these settings in the operating manual.
Observe the following installation instructions:
!
CAUTION!
• Secure the monitor in such a way that it cannot become loose under any
circumstances (sudden braking, accidents) and cause injuries to the
occupants of the vehicle.
• Do not attach the monitor in the air bag deployment path, as this could cause
injury if the airbags are triggered.
Observe the following instructions when working with electrical parts:
A
NOTICE!
• When testing the voltage in electrical cables, only use a diode test lamp
(fig. 1 1, page 3) or a voltmeter (fig. 1 2, page 3).
Test lamps with a bulb (fig. 1 3, page 3) consume excessive current which
can damage the vehicle's electronic system.
• When making electrical connections (fig. 3, page 4), ensure that:
– they are not kinked or twisted
– they do not rub on edges
– they are not laid in sharp-edged ducts without protection.
• Insulate all connections.
• Secure the cables against mechanical wear by using cable binders or
insulating tape, for example on existing cables.
38
M9LQ
EN