Herunterladen Diese Seite drucken

Before Startup; Attaching The Accessories; Water Supply - Kärcher K 2 Premium Betriebsanleitung

Vorschau ausblenden Andere Handbücher für K 2 Premium:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
6 Detergent suction hose with detergent
filter and lid
7 Detergent Tank
8 Coupling element for water connection
9 Storage for spray lance
10 Storage for trigger gun
11 Mains cable with mains plug
12 Bearing wheel
13 Trigger gun
14 Lock trigger gun
15 Clamp for high pressure hose
16 High pressure hose
———————————————––––
Optional accessories
17 Spray lance with pressure regulation
(Vario Power)
Carrying out the most common cleaning
tasks. The work pressure can be stage-
lessly regulated between "Min" and
"Max". You can add detergent when
"Mix" is selected.
In order to adjust the working pressure,
release the lever of the hand spray gun
and turn the spray lance to the desired
position.
18 Spray lance with Dirtblaster
For strong contaminations
19 Washing brush
Suitable for use with detergents.
20 Rotary washing brush
Suitable for use with detergents.
Especially suitable for cleaning cars.
21 Foam nozzle with detergent container
With powerful foam for effortless clean-
ing.
———————————————––––
Not included in the delivery
22 Water supply hose
Use a fabric reinforced water hose with
a commercially available coupling. Min-
imum diameter 13 mm (1/2 inch); mini-
mum length 7.5 m.
16

Before Startup

Attaching the Accessories

Mount loose parts delivered with appliance
prior to start-up.
Illustrations on Page 3
Illustration
 Insert the transport wheels and lock
them.
Illustration
 Attach the transport handle.
Illustration
 Pull the suction hose for detergent
through the cover of the detergent tank
until the filter contacts the bottom of the
tank.
 Close the detergent tank with the lid.
 Lock the detergent tank in place on the
appliance.
Illustration
 Screw the coupling element to the wa-
ter connection on the appliance.
Illustration
 Pull out the clamp for the high-pressure
hose from the hand spray gun (e.g. a
Philips screwdriver).
Illustration
 Connect high pressure hose to trigger
gun.
 Push the clamp in until it locks. Check
the secure connection by pulling on the
high-pressure hose.
For connection values, see type plate/tech-
nical data.
Observe regulations of water supplier.
Warning
According to applicable regulations, the ap-
pliance must never be used on the drinking
water net without a system separator. A
suitable system separator by KÄRCHER or
alternatively a system separator according
to EN 12729 type BA must be used.
Water that has flown through a system sep-
arator is no longer classified as drinking
water.
– 7
EN

Water supply

Werbung

loading