Replacing Of The Illuminant; Trouble Shooting; Possible Cause - Schneider SL 300C CB A++NF Bedienungsanleitung

6. Wipe and dry the appliance and door seals with dry and soft cloths.
7. After cleaning leave the door open for some time to ventilate the appliance.

5.2 Replacing of the illuminant

WARNING! The LED-illuminant must be replaced by a competent
person only. If the LED-illuminant is damaged, please contact a qualified
professional. Illuminants and the replacing of illuminants are not included
in guarantee.

6. Trouble shooting

POSSIBLE CAUSE

T
1. The plug of the appliance is not
connected to the socket.
2. The plug has become loose.
3. The socket is not supplied with
energy.
4. The fuse is switched off.
5. The voltage is too low.
T
HE COMPRESSOR DOES NOT WORK AT ALL
1. Incorrect energy supply.
T
HE COMPRESSOR OPERATES FOR TOO LONG
1. The appliance has been switched off
for a while.
2. Too much or too hot food in the
appliance.
3. Doors opened too often or too long. 3. Do not open the door too often/too
MALFUNCTION
HE APPLIANCE DOES NOT WORK AT ALL
MEASURE
.
1. Connect the appliance to the mains
properly.
2. Check the plug.
3. Check the corresponding socket by
connecting it with another appliance.
4. Check the fuse box.
5. Compare the data on the model
plate with the data of your energy
supplier.
1. Check the energy supply.
1. The appliance needs some time to
reach the preset temperature.
2. Remove any hot food.
long.
.
.
54