Setting Of The Temperature; Refrigerator; Freezer - Schneider SL 300C CB A++NF Bedienungsanleitung

WARNING! To disconnect the appliance from the mains, you must
unplug the appliance or use a cut-off device.

4.3 Setting of the temperature

When the appliance is powered on for the first time, the backlighting of the icons
on the display starts working. If no buttons have been pressed and the doors are
closed, the backlighting will turn off.

4.3.1 Refrigerator

 Press F
to set the desired temperature from +2
RIDGE
 The display indicates the relevant values as shown below.

4.3.2 Freezer

 Press F
to set the desired temperature from -14
REEZER
 The display indicates the relevant values as shown below.
0
C to +8
or
0
C to -24
0
C.
0
C.
45