Providers; Parameter Query; Parameter Display; Parameter Reset - Disty distybase duo plus Bedienungsanleitung

20
3 Programming mode
Function
Provider selection
The provider code is dialled each time an external call is made.
Factory setting: 0

3.2.18 Parameter query

Function

Parameter display

A handset can be used to read the current setting for different
parameters. After entering the relevant parameter code and confirming
#
this with , replace the telephone receiver. You will then receive a call
from the distybase duo/duo plus/duo exant and the parameter code and
the current status will be shown on the telephone display.
Flash time example:
#95123#
Input
ms)
Display registered handsets example:
#9515#
Input
3, 4, 8 are registered.
Display call assignment example:
#95111#
Input
subscribers 1, 3, 6 => line 2: subscribers 3, 4, 5 and hunt group call.

3.2.19 Parameter reset

Function
Parameter reset
All parameters are reset to the factory settings, the handsets remain
registered unchanged.
Parameter
code
46
Parameter
code
51
=> output 23-010 => flash time (10*10 ms = 100
=> output e.g. 1121314150607081 => handsets 1, 2,
=> output e.g.1136_23459 => line 1:
Parameter
code
90
Prefix Inputs
1 #
Inputs
#
Inputs
#