Call Assignment Of The Handsets; Line Assignment For Outgoing Calls - Disty distybase duo plus Bedienungsanleitung

3 Programming mode

3.2.1 Call assignment of the handsets

Function
Call assignment
For each line, incoming calls can be assigned to a maximum of 4 call
destinations. Call destinations are the handsets 1 to 8 and hunt group call
9. With call destinations 1-8, the caller's telephone number is displayed
via CLIP. Call destination 9 signals all registered handsets but without
CLIP display, call waiting will not be signalled.
The analogue port of distybase duo plus will not be rung by hunt group
destination 9.
Not all types of GAP compliant handsets are able to receive calls by hunt
group destination 9.
Programming example:
Calls to line 1 should be signalled on handsets 1, 3 and 6 with CLIP
display.
Calls to line 2 should be signalled on handsets 3, 4 and 5 with CLIP
display. And signalled without CLIP display on other handsets.
Procedure:
1) Activate programming mode
11 1 1 3 6 #
2) Enter
11 2 3 4 5 9 #
3) Enter
4) Close programming mode
Factory setting: 1, 2, 3, 9

3.2.2 Line assignment for outgoing calls

Independent of setting of parameter 12 it is possible to seize a specific
line by using the access codes.
Function
Line assignment
When making an external call, any free telephone line is used.
Parameter Line no.
code
11 1...2
Parameter Mob. no. Inputs
code
12 0...8
9
Mob no.
0...9 #
0 #