Line Access - Disty distybase duo plus Bedienungsanleitung

3 Programming mode

3.2.16 Line access

Function
Line access
Automatic line access is disabled. On outgoing calls the internal dial tone
is supplied. The line will be occupied after dialling an external number.
Line access
Automatic line access is enabled. On outgoing calls the line will be
occupied immediately and the external dial tone is supplied. When dialling
an internal number the line will be released again.
Factory setting: 1
The analogue port of distybase duo plus always seizes the assigned line
immediately.
3.2.17 Providers
Function
Provider setting
Depending on the setting for parameter 46, the stored prefix is dialled for
any external call.
Factory setting: No prefix stored.
Provider selection
No provider code is dialled.
Parameter
code
44
44
Parameter Prefix
code
45 xxxxxxxxxx
(max. 10 figures)
46
19
Inputs
0 #
1 #
Inputs
#
0 #