Changing The Pin; Music On Hold - Disty distybase duo plus Bedienungsanleitung

16
3 Programming mode

3.2.12 Changing the PIN

Function
Changing the PIN
Access to programming mode can be protected using the four-digit PIN.
The PIN only needs to be entered if a new PIN has been set beforehand
in programming mode. To change the PIN, activate programming mode,
enter the new PIN twice and confirm this by pressing
confirmed by the positive acknowledgement tone. Programming mode
can then only be accessed again by entering the new PIN once more. To
restore the factory setting, change the PIN to 0000.
If you forget the PIN, the distybase duo/duo plus/duo exant can only be
reset by the Customer Service department.
Factory setting: 0 0 0 0

3.2.13 Music on hold

Function
MOH
An external caller on hold hears no call on hold tone.
MOH
An external caller on hold hears call on hold tone.
Factory setting: 1
Parameter
code
26 new PIN new PIN #
#
. The change is
Parameter
code
27
27
Inputs
Inputs
0 #
1 #