Programming Mode; Activating Programming Mode; Setting Parameters In Programming Mode - Disty distybase duo plus Bedienungsanleitung

8
3

Programming mode

3 Programming mode
Programming mode on the distybase duo/duo plus/duo exant can only be
activated within the first 10 minutes after plugging in the power supply
unit. This prevents the parameters being changed accidentally during
operation.
Programming mode allows you to set various parameters to modify the
distybase duo/duo plus/duo exant to suit the functionality of your
telephone connections. Additional parameters allow the distybase
duo/duo plus/duo exant to be set according to your personal
preferences.
3.1

Activating programming mode

To activate the programming mode, select
Then enter the PIN for your distybase duo/duo plus/duo exant. The PIN
only needs to be entered if a new PIN has been set up beforehand in
programming mode.
You will now hear a special dialling tone indicating that programming
mode is active.
3.2

Setting parameters in programming mode

Programming mode needs to be activated before the following
parameters can be set. The programming process is concluded by
#
entering and confirmed by the positive acknowledgement tone. The
change will be effective immediately. You will then hear the special dialling
tone once more, which means that you can continue programming other
functions.
If an invalid value is entered during programming, a negative
acknowledgement tone is sounded, the procedure is cancelled and you
will hear the special dialling tone once more.
If during programming no input is made for one minute, the procedure is
cancelled and you will hear the special dialling tone again.
Programming mode can be exited at any time by replacing the handset;
the distybase duo/duo plus/duo exant will then be returned to normal
mode.
#9
on a registered handset.