42
|
12.
12.1
Danger from electrical voltage!
The device may only be switched off and uninstalled by a trained electrician or trained and instructed
»
qualified personnel!
Observe the 5 rules of electrical safety (see section 2.5)!
»
Switch the fan off.
»
Danger of impact from falling fan or parts of the fan!
When selecting the hoisting equipment and fitting material, observe the weight, tendency to vibrate
»
and shear forces (weight information on the name plate).
Wear a helmet and protective goggles.
»
Danger from impact and cuts!
Wear protective gloves when dismounting!
»
Disassemble carefully.
»
12.2
Carefully disconnect all the electrical lines.
»
Disconnect the fan from the supply connections.
»
12.3
Carefully remove the fastening material.
»
13
13.1
13.1.1
Danger from electrical voltage!
The device may only be switched off and uninstalled by a trained electrician or trained and instructed
»
qualified personnel!
Observe the 5 rules of electrical safety (see section 2.5)!
»
Switch the fan off.
»
13.1.2
Disconnect the fan and disassemble as described in chapter 12.
»
Disconnect the fan from the supply connections.
»
Disassemble the fan into its components.
»
Separate the parts according to:
»
– reusable material,
– material groups to be disposed of (metal, plastics, electrical parts, etc.).
Ensure material is recycled. Observe national regulations.
»
Uninstalling/disassembly
Safety information
Disconnecting
Disassembly
Disposal
Disposal of the fan
Safety information
Final disassembly and disposal