Switching The Device On - SystemAir RVK sileo Betriebsanleitung

36
|
8.4
Check that safety elements and protective grilles are securely fastened.
8.5
Switch the fan off.
Check that the connection cables are fitted properly
»
Lay the connection cables in the terminal box in such a way that allows the cover of the terminal box
»
to be closed without resistance.
Use all of the locking screws.
»
Insert the screws by hand to avoid damaging the thread.
»
8.6
Before switching the device on, check the device for externally visible damage and ensure that the
»
protective equipment functions properly.
Check the airways of the fan for foreign bodies and remove any found.
»
Apply the nominal voltage for supply.
»
Start the device
»
8.7
Disconnect the device from the power supply.
»
When disconnecting, make sure to remove the earth wire last!
»
Checking the safety elements
Checking the connections
WARNING
Danger from electrical voltage!
Ensure that all phases are completely free of voltage.
»
Observe the 5 rules of electrical safety (see section 2.5)!
»

Switching the device on

Switching the device off for maintenance work
WARNING
Danger from electrical voltage!
Observe the 5 rules of electrical safety (see section 2.5)!
»