Mounting Bracket; Electrical Connection - SystemAir RVK sileo Betriebsanleitung

6.4

mounting bracket

CAUTION
Use the delivered screws for fitting the mounting bracket and take care for the following
figure (figure 5).
fig 5: mounting bracket
7.

Electrical connection

7.1 Safety information
Danger from electrical voltage!
The electrical connection may only be established by a trained electrician or trained and qualified
»
personnel.
The electrical connection should be done in accordance with the valid regulations.
»
Prevent the ingress of water into the connection box.
»
Observe the 5 rules of electrical safety (see section 2.5)!
»
7.2 Cables
Only use cables that are configured for the current strength according to the name plate.
»
When measuring the cross-section, observe the measuring guidelines as per EN 61800-5-1.
»
Include at least the outer conductor cross-section when measuring the earth wire.
»
33
|