Installation; Safety Information; Installation Conditions; Instructions For Installation - SystemAir RVK sileo Betriebsanleitung

32
|
6.
6.1
Installation may only be carried out by trained, qualified personnel.
»
Comply with the system-related conditions and the requirements of the system manufacturer or plant
»
builder.
Safety elements, e.g. protective grilles, may not be dismantled, bypassed or put out of function.
»
Danger of impact from falling fan or parts of the fan!
Check the surface before installation for load-bearing capacity.
»
When selecting the hoisting equipment and fi tting material, observe the weight, tendency to vibrate
»
and shear forces (weight information on the name plate).
Wear a helmet and protective goggles.
»
6.2
Provide contact and intake protection and ensure safety distances according to DIN EN ISO13857 and
»
DIN24167-1.
Ensure that there is enough space for the installation of the fan.
»
Protect against dust and wetness when installing.
»
6.3
Install the fan in such a way that no vibrations are transmitted to the channel system or the housing
»
frame.
Ensure that the fan is installed firmly and stably
»
Ensure secure access to the fan for maintenance and repair.
»
Ensure uninhibited and constant inflow into the appliance and free exhaust.
»
Installation in outdoor area only with weather roof from our accessory programm.
»
fig 4: installation

Installation

Safety information

Installation conditions

Instructions for installation

NOTE
To avoid damages on the bearings of the fan, it has to be warranted, that the air is
»
able to enter and escape the fan nontwisting and smoothly.
Only if the air is able to enter and escape the fan nontwisting and smoothly the
»
stated power is reachable.
Directly before and after the fan you have to install straight ducts. Regarding duct
»
installation, please pay attention to the following figure (fig. 4).
min.
2,5x ØDN
min.
2,5x ØDN
ØDN