Leister DRIVE Bedienungsanleitung Seite 11

Warning TRIAC DRIVE
Danger to life when opening the device as live components and connections are
exposed. Unplug the line/mains plug from the plug socket before opening the device.
Incorrect use of the hot air tool can present a fire and explosion hazard
especially near combustable materials and explosive gases.
Danger of getting burned! Do not touch the overlap welding nozzle when they are
hot. Let the tool cool down. Do not point the hot air flow in the direction of people
or animals.
Only connect the tool to a receptacle with protective earth conductor. Any dis-
connection of the protective earth conductor, in or outside the tool is dangerous!
Only use extension lead with protective earth conductor .
Caution TRIAC DRIVE
The rated voltage stated on the tool must correspond with the mains voltage.
230
Extract hot-air blower in case of power breakdown.
120
For personal protection, we strongly recommend the tool to be connected to an
FI
RCCB (Residual Current Circuit Breaker) before using it on construction sites.
The tool must be operated under supervision.
Heat can ignite flammable materials which are not in view.
The device machine may only be used by qualified specialists or under their supervi-
sion. Children are not authorized to use this device.
Protect the tool from damp and wet.
11