Power Connection Of The Conductivity Measuring Equipment; Commissioning - Binder PURE AQUA SERVICE Montageanleitung

GB / US
4.6

Power connection of the conductivity measuring equipment

Plug the cable of the power adapter into the socket of the measuring equipment.
Figure 8: Electrical connection of the measuring equipment
Connect the power adapter into an electrical outlet with voltage between 100 VAC and 240 VAC,
50/60 Hz.
Damage to the equipment.
∅ No liquid must pass by the cable connection into the inside of the measuring
equipment.
 Ensure dry installation environment.
5.

Commissioning

The cartridge must be upright during operation and be protected against tipping over.
The connected cartridge is pressurized. Do not open. The content can irritate eyes and skin.
Opening by force or damage to the cartridge.
Risk of injury.
Irritation of skin and eyes.
Damage to the cartridge and its environment.
∅ Do NOT open.
 Prevent from tipping over.
After using the equipment, close the water tap at the freshwater supply.
Water treated with BINDER Pure Aqua Service is not adapted as drinking water. Drinking the treated
water can implicate loss of electrolytes.
Non-potable water.
Health hazard.
∅ Do NOT drink processed water.
Mounting instructions BINDER Pure Aqua Service (E3) 12/2017
CAUTION
CAUTION
CAUTION
page 32/57