Mounting; Installation Of The Measuring Equipment - Binder PURE AQUA SERVICE Montageanleitung

GB / US
4.

Mounting

4.1

Installation of the measuring equipment

Remove the plug with a 10 mm allen key.
Mount the supplied conductivity measuring equipment.
Damage to the equipment.
∅ No liquid must pass by the cable connection into the inside of the measuring
equipment.
 Ensure dry installation environment.
Mounting instructions BINDER Pure Aqua Service (E3) 12/2017
Figure 2: Removing the plug
Figure 3: Mounting the measuring equipment
CAUTION
page 29/57