Using The Software Charge Master - VOLTCRAFT B6 MINI Bedienungsanleitung

CELL NUMBER
INCORRECT
INT. TEMP. TOO HI
EXT. TEMP. TOO HI
OVER CHARGE
CAPACITY LIMIT
OVER TIME LIMIT
BATTERY WAS FULL

20. USING THE SOFTWARE CHARGE MASTER

The free "Charge Master" software gives you unparalleled ability to operate the charger through
the computer. You can monitor pack voltage, cell voltage and other data during the charging,
and view charge data in real-time graphs. You can also initiate, control charging and update
firmware with it.
To install the software, insert the included CD into your computer and follow the instructions on
the computer screen for installation. The software is compatible with Windows Enterprise, 8, 7,
Vista and XP (SP). After the installation, connect the charger to the computer with a USB cable
(not included) to register and start using.
The cell number is wrong
The internal temperature of the unit goes too high
The external temperature of the unit goes too high
The battery capacity is more than the maximum user set
capacity
The charging time is longer than the maximum user set
charging time
The battery voltage is higher than the maximum user set
voltage when charging in balance mode
64