Intended Use; Delivery Content - VOLTCRAFT B6 MINI Bedienungsanleitung

2. INTENDED USE

The charger is used to charge NiCd + NiMH type rechargeable batteries (1 - 15 cells), LiPo/
LiIon/LiFe batteries (1 - 6 cells) and lead acid batteries (2 V - 20 V). The charge current can
be set between 0.1 A and 6.0 A depending on the connected batteries and their cell number/
capacity.
Batteries can also be discharged; the discharge current is between 0.1 to 2.0 A.
The charger can be connected to a stabilised direct current between 11 V/DC and 18 V/DC.
A two-line illuminated LC display and four keys are used to control the charger.
A balancer is integrated into the charger for LiPo/LiIon/LiFe batteries, with balancer connector
sockets for the battery located on the right side of the charger.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms,
must be avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you
use the product for purposes other than those described above, the product may be damaged.
In addition, improper use can cause hazards such as short circuiting, fire, electric shock etc.
Read the instructions carefully and keep them. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements.

3. DELIVERY CONTENT

• Multi-charger
• Software CD
• Connection cable with alligator clips
• 5 x charging cables (T plug/alligator clips/Futaba plug/JST plug/XT60 plug)
• Operating instructions
37