Valeo MINISPHERE 100 Betriebsanweisung Seite 33

Minisphere 100/130
tially the errors that occur with a duration of two 2 seconds each.
If an error has been fixed, it is no longer displayed automatically.
Fig. 17: SC410 Errors
2.2.9. Error code description
Error
Component
code
F00 Clutch / compres- Defective or not properly
sor hooked up
F01 Operating Operating voltage
voltage < 10V... 16V)
F02 System No 12V system
recognized
Reason Remedy
– Check wiring harness
– Replace pressure
switch
– Replace compressor
– Replace ECU
– Check wiring harness
– Replace ECU
– Check wiring harness
– Replace ECU
Control elements and display
Error
Component
code
F03 System No basic or standard
system recognized
F04 Inside tempe- Short circuit to plus pole – Check wiring harness
rature sensor
F05 Inside tempe- Short circuit to ground
rature sensor
F06 Channel tempe- Short circuit to plus pole – Check wiring harness
rature sensor
F07 Channel tempe- Short circuit to ground
rature sensor
F08 Memory module No access to EEPROM /
no data consistency
F09 Water valve Water valve cannot be
calibrated or brought into
the correct position.
F10 Clutch Repeated occurrence of
the clutch error
Reason Remedy
– Replace ECU
– Replace sensor
– Replace ECU
– Check wiring harness
– Replace sensor
– Replace ECU
– Replace sensor
– Replace ECU
– Check wiring harness
– Replace sensor
– Replace ECU
– Replace ECU
– Water valve / sensor
– Genuine parts used?
– Replace acc. to spare
parts list
– See remedy F00
29