Valeo MINISPHERE 100 Betriebsanweisung Seite 30

Control elements and display
Activate
Press button to reactivate the compressor of the
air-conditioning unit.
The cooling function is switched on.
Fig. 10: SC410 The compressor of the air-conditioning unit is ac-
tivated.
NOTE:
– The compressor must have been turned off for at least 2 minutes
before it can be turned on again. If one operates within this period the
AC button, the device switches the air compressor after 2 minutes
on again (LED of the AC button flashes).
2.2.4. Adjust temperature
The temperature can be adjusted from 17 °C to 28 °C in 0.5 °C steps.
26
Press button shortly to increase the currently displayed value of
the setpoint temperature by 0.5 °C.
The shown in the display temperature value increases by 0.5 °C, e.g.
from 22.0 °C to 22.5 °C.
Fig. 11: SC410 Temperature change
Press button shortly to decrease the currently displayed value of
the setpoint temperature by 0.5 °C.
The shown in the display temperature value decreases by 0.5 °C, e.g.
from 20.5 °C to 20.0 °C.
NOTE:
The adjustment of the temperature does not affect the auto mode. This
remains activated and the device attempts e.g. by adjusting the fan
speed to achieve the target value.
Minisphere 100/130