Setting Up Your Tv; Mounting The Front Speakers, And Preparing The Subwoofer - JVC PD-35D30ES Bedienungsanleitung

Setting up your TV

• Use the stand designed for this TV. For details of how to attach the stand, refer to the stand user's manual.
• Ensure that the TV is installed on the wall by a skilled installer.

Mounting the front speakers, and preparing the subwoofer

Mounting the front speakers
Mount the supplied DD speakers on the left and right of the TV.
• When using the stand designed for the TV, mount the TV on the stand beforehand.
• Place a soft cloth on the floor for protection before laying the TV down to attach the front speakers.
<PD-42D30ES>
1 Loosen the speaker mounting
screws at the back of the TV
Using a Philips screwdriver, loosen
the speaker mounting screws (three
each side) until the heads project
approximately 3 mm.
<PD-35D30ES>
1 Attach the speaker mounting
screws to the back of the TV
Using a Philips screwdriver, tighten
the speaker mounting screws (three
each side) until approximately
3 mm is left protruding.
DISPLAY INPUT
CONNECT TO SYSTEM CABLE
• Attach only the supplied DD speakers to the TV.
6
2 Attach the front speakers to
the back of the TV
Place the heads of the screws in the
screw holes in the front speaker
mounting fixture, and slide the
speaker downwards.
2 Attach the front speakers to
the back of the TV
Place the heads of the screws in the
screw holes in the front speaker
mounting fixture, and slide the
speaker downwards.
DISPLAY INPUT
CONNECT TO SYSTEM CABLE
3 Lock the front speakers in
place
Tighten the screws to lock the
mounting fixture in place using a
Philips screwdriver.
3 Lock the front speakers in
place
Tighten the screws to lock the
mounting fixture in place using a
Philips screwdriver.
DISPLAY INPUT
CONNECT TO SYSTEM CABLE