Setting Up Your Tv; Mounting The Front Speakers, And Preparing The Subwoofer - JVC PD-42D30ES Bedienungsanleitung

Setting up your TV

• Use the stand designed for this TV. For details of how to attach the stand, refer to the stand user's manual.
• Ensure that the TV is installed on the wall by a skilled installer.

Mounting the front speakers, and preparing the subwoofer

Mounting the front speakers
Mount the supplied DD speakers on the left and right of the TV.
• When using the stand designed for the TV, mount the TV on the stand beforehand.
• Place a soft cloth on the floor for protection before laying the TV down to attach the front speakers.
1 Loosen the speaker mounting
screws at the back of the TV
Using a Philips screwdriver, loosen
the speaker mounting screws (three
each side) until the heads project
approximately 3 mm.
• Attach only the supplied DD speakers to the TV.
Preparing the subwoofer
Either stand the subwoofer vertically or lay it down on its side, peel the
paper from the supplied rubber feet, and stick the feet in the four corners on
the surface to be used as the base. The rubber feet prevent slipping and
resonance, and also protect the speaker cord.
• The subwoofer is not designed to withstand electromagnetic fields. Also, it vibrates and should therefore not be installed near
equipment such as VCR, or equipment where it will be subject to vibration or electromagnetic fields.
6
2 Attach the front speakers to
the back of the TV
Place the heads of the screws in the
screw holes in the front speaker
mounting fixture, and slide the
speaker downwards.
3 Lock the front speakers in
place
Tighten the screws to lock the
mounting fixture in place using a
Philips screwdriver.
Subwoofer
Rubber feet
Mounting example:
Subwoofer to be used
lying down