Adjust The Volume; Watch Images From External Equipment - JVC PD-35D30ES Bedienungsanleitung

Remote control buttons and functions
Use the PR LIST:
1 Press the h h (information) button to display the
h h
PR LIST
Pressing the h (information) button changes the display
as follows:
PR LIST
PR ID
AV
01 BBC1
02
03
04
05
06
07
08
09
TV OK
-10 +10
D0011-EN
2 Press the 5 5 and 6 5 5
programme number (PR). Then press the a
button
• For programme numbers (PR) with the CHILD
LOCK function set, the n (CHILD LOCK) mark
appears next to the programme number (PR) in the
PR LIST.
• You cannot use the 6 buttons to choose a
programme number (PR) with the CHILD LOCK
function set.
• Even if you try to choose a programme number (PR)
with the CHILD LOCK function set, the n (CHILD
LOCK) mark will appear, and you cannot watch the
TV channel. To watch the TV channel, see "CHILD
LOCK" on page 33.

Adjust the volume

Press the 5 5 buttons to adjust the volume.
5 5
The volume indicator appears and the volume changes as
you press the 5 buttons.
• The headphone volume is adjusted with the
"HEADPHONE" menu (see page 30).
Muting the sound
Press the l l l l (muting) button to turn off the
sound.
Pressing the l (muting) button again restores the previous
volume level.

Watch images from external equipment

Use the o o button:
o o
Press the o o o button to choose an EXT o
terminal.
TV mode
Programme
numbers
PR 1 – PR 99
Use the 6 6 buttons:
6 6
Press the 6 6 buttons to choose an EXT
6 6
terminal.
18
12 : 00
No display
6 buttons to choose a 6 6
a a a
EXT modes
EXT-1 EXT-2
or
S2
E1 E2
EXT-3
or
E3 S3
EXT-5 EXT-4
or
E5 S5 E4
Use the PR LIST:
1 Press the h h (information) button to display the
h h
PR LIST
2 Press the 5 5 and 6 6 buttons to choose an
5 5 6 6
EXT terminal. Then press the a
• The EXT terminals are registered after the
programme number PR 99.
• You can choose a video input signal from the S-
VIDEO signal (Y/C signal) and regular video signal
(composite signal). For details, see "S-IN (S-VIDEO
input)" on page 31.
• If you do not have a clear picture or no colour
appears, change the colour system manually. See
"COLOUR SYSTEM" on page 27.
• This TV set has a function which can automatically
change over the input according to a special signal
output from an external device. (The EXT-4 and
EXT-5 terminals do not support this function.)
To return to a TV channel:
Press the b button, the 6 buttons or the number
buttons.
To use the programme number PR 0 (AV):
When the TV and VCR are connected only by the aerial
cable, choosing the programme number PR 0 (AV) allows
you to view images from the VCR. Set the VCR RF channel
to the programme number PR 0 (AV) manually. For details,
see "EDIT/MANUAL" on page 36.
Pressing the o button changes the choice as follows:
TV mode
EXT-1
Programme PR 0
numbers
PR 1 – PR 99
EXT-5
E5
• The VCR sends its playback image along the aerial cable
as an RF (radio frequency) signal.
• Also see your VCR instruction manual.
a a a button
EXT modes
EXT-2
or
E1 E2 S2
EXT-3
or
S3
E3
EXT-4
or
S5 E4