Seite 1
ENGLISH DEUTSCH FRANÇAIS NEDERLANDS CASTELLANO ITALIANO PORTUGUÊS PD-42D30ES PDP COLOUR TELEVISION INSTRUCTIONS PDP FARBFERNSEHGERÄT BEDIENUNGSANLEITUNG PDP TELEVISEUR COULEUR MANUEL D’INSTRUCTIONS PDP KLEURENTELEVISIE GEBRUIKSAANWIJZING PDP TELEVISOR A COLOR MANUAL DE INSTRUCCIONES PDP TELEVISORE A COLORI ISTRUZIONI PDP TELEVISOR A CORES INSTRUÇÕES...
Seite 2
Warning DO NOT cut off the mains plug from this equipment. If As these colours may not correspond with the coloured the plug fitted is not suitable for the power points in your marking identifying the terminals in your plug proceed as home or the cable is too short to reach a power point, then follows: obtain an appropriate safety approved extension lead or...
Seite 3
Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Burn-in A characteristic of Plasma Display Panels (PDPs) is that displaying the same image for a long time causes a part of the image to stay on the screen (this is called phosphor burn-in). Avoid burn-in as follows. Do not display static images or characters for long periods of time. While an image is displayed With power OFF 19:03...
Seite 5
Point defects PDPs use collections of fine pixels to display images. While there is no problem with more than 99.99% of these pixels, please understand that a very small number of pixels may not light or may light all the time. Do not install the TV near electronic equipment that is affected by electromagnetic waves It may cause interference in images, sound, etc.
Using the PIP function ........19 Changing the COUNTRY setting ....39 Using the MULTI-PICTURE function ....20 Using the DECODER (EXT-2) function... 39 Operating a JVC brand VCR or DVD player ..20 Additional preparation......40 Teletext function........21 Connecting external equipment ...... 40 Basic operation ..........21...
Checking contents of packages The TV and components are supplied in three packages. Check that all components are present. Contact your retailer immediately if any components are missing. System cable Remote control MEN U TV/A V Power cord Mounting screw × 2 Hook ×...
Setting up your TV • Use the stand designed for this TV. For details of how to attach the stand, refer to the stand user’s manual. • Ensure that the TV is installed on the wall by a skilled installer. Mounting the front speakers, and preparing the subwoofer Mounting the front speakers Mount the supplied DD speakers on the left and right of the TV.
Setting up your TV Installation Cautions for installation • Do not tilt the TV towards the left or right, or towards the back. • Install the TV in a corner on a wall or on the floor so as to keep cords out of the way. •...
Connections Caution • Turn off all the equipment including the TV before connecting anything. Connection diagram AC INPUT 110-240V Cable supplied with TV • Refer to page 12 for connection details. TV (back) Left front speaker Right front speaker DISPLAY INPUT CONNECT TO SYSTEM CABLE FRONT FRONT...
Connections Connecting the front speakers and subwoofer Use the supplied speaker cords to connect the speakers to the speaker terminals at the back of the TV. Connecting the speaker cord to the front speaker terminal Connect using the supplied front speaker cords (approximately 1.2 m in length). 1 Press the spring-loaded speaker input terminal 2 Press the core of the cord into the terminal and lever in the direction of the arrow...
Connections Bundling speaker cords Use the supplied cord clamps to bundle the connected speaker cords together. Cord clamp Speaker cords • Peel the paper from the back of the cord clamp and attach it at the desired location. To ensure that the cord clamp is firmly attached, wait a few minutes before inserting the speaker cords into the clamp.
Connections Connecting the aerial and video Aerial cassette recorder (VCR) 75-ohm Coaxial Cable • The connecting cables are not provided. Back of the receiver • For further details, refer to the manuals provided with the devices to be connected. EXT- EXT- If you are connecting a VCR, follow A A A A →...
Connections Receiver rear Connecting the power cord to the AC outlet Insert the AC plugs on the power cords from the TV and receiver into AC outlets. Caution DISPLAY OUT EXT- EXT- • Operate only from the power source specified (AC 110 EXT- –...
(Standby) button again to turn your TV on. If “ACI START/ACI SKIP” appears in the AUTO • If the JVC logo does not appear this is because your PROGRAM menu: TV has already been turned on for the first time: You can use the ACI (Automatic Channel Installation) use the “LANGUAGE”...
AC outlets. To use T-V LINK functions: A “T-V LINK compatible VCR” means a JVC video cassette recorder with the T-V LINK logo, or with one of the following logos. However, these VCRs may support some or all of the features described earlier.
TV buttons and functions Turn the TV on from standby mode Display front Press the A A A A button or P p p buttons to turn the TV on from standby mode • Check that the AC plugs on the power cords from the TV and receiver are connected correctly to AC outlets.
Remote control buttons and functions 1 Muting button 2 Number buttons 3 c button 4 3 sound button 5 Information button 6 b button 7 5 buttons 8 Standby button 9 Colour buttons 0 a button - 6 buttons = VCR/DVD/Teletext control button ~ VCR P DVD switch ! g (Text) button @ P button...
Remote control buttons and functions Use the PR LIST: Use the PR LIST: 1 Press the h h (information) button to display the 1 Press the h h (information) button to display the PR LIST PR LIST Pressing the h (information) button changes the display 2 Press the 5 5 and 6 6 buttons to choose an...
Remote control buttons and functions Choose the ZOOM mode ZOOM function 1 Press the c c button to display the ZOOM You can change the screen size according to the picture menu aspect ratio. Choose the optimum one from the following ZOOM modes.
Remote control buttons and functions Displaying the current time Using the PIP function You can display the current time on the screen. You can view two pictures (Main-picture and sub-picture). Two different TV programmes can be watched at the same Press the h h (information) button to display the time, or a TV programme and a video programme from an...
2 Press the VCR/DVD control button to control your VCR or DVD player Using the MULTI-PICTURE function • If your device is not made by JVC, these buttons will not work. You can display multi-pictures so you can find a program you want to view.
Teletext function Using the List Mode You can store the numbers of your favourite teletext pages MENU in memory and call them up quickly using the colour buttons. To store the page numbers: 1 Press B B button to go into the List mode The page numbers you have stored are displayed at the bottom of the screen.
Teletext function Sub-page Cancel Some teletext pages include sub-pages that are You can search for a teletext page while watching TV. automatically displayed. 1 Press the number button to enter a page You can hold any sub-page, or view it at any time. number, or press a colour button 1 Press the D D (Sub-page) button to operate the...
Using the TV’s menu This TV has a number of functions you can operate using 5 Press the a a button to complete the setting menus. To use all your TV’s functions, you need to The menu disappears. understand the basic menu operating techniques fully. •...
PICTURE SETTING Refer to “Using the TV’s menu” (see page 23) for details of COLOUR TEMP. displaying the menu. You can select one of three COLOUR TEMP. modes (three tones of white) to adjust the white balance of the picture. PICTURE SETTING Since white is the colour which is used as a reference for all PICTURE MODE...
PICTURE FEATURES Refer to “Using the TV’s menu” (see page 23) for details of Super DigiPure displaying the menu. The Super DigiPure function uses the latest in digital PICTURE FEATURES technology to give you a natural-looking picture. The Super DigiPure function includes the following two functions. DIGITAL VNR AUTO AUTO...
PICTURE FEATURES COLOUR SYSTEM MOVIE THEATRE The colour system is chosen automatically. However, if the The MOVIE THEATRE function displays a cinema film picture is not clear or no colour appears, choose the colour picture more smoothly and naturally on the screen. system manually.
PICTURE FEATURES PIP (picture-in-picture) PIP POSITION: You can choose one of four positions for the sub-picture. 1 Press the 6 6 buttons to choose PIP. Then press the a a button The PIP menu appears. PIP POSITION MULTI-PICTURE BACK D0061-EN 2 Press the 6 6 buttons to choose PIP POSITION 3 Press the 5...
SOUND SETTING Refer to “Using the TV’s menu” (see page 23) for details of SPEAKER displaying the menu. You can turn off the sound from the TV speakers; but you SOUND SETTING should only do this if you have connected an audio system STEREO/ to the TV instead of the TV speakers.
Seite 31
SOUND SETTING HEADPHONE You need to use the HEADPHONE menu to adjust the volume of the headphones. The HEADPHONE menu can also be used to set whether or not sound comes from the TV speakers when the headphones are being used and to perform the settings for the sound coming from the headphones.
EXT SETTING Refer to “Using the TV’s menu” (see page 23) for details of LIST displaying the menu. You can store a name for each of the devices connected to EXT SETTING each EXT terminal. Giving a name to an EXT terminal EXT-1 makes the EXT terminal number appear on the screen, DUBBING...
Seite 33
EXT SETTING 2 Press the 6 6 buttons to choose an EXT terminal or TV. Then press the a a button The arrow in the menu represents a signal flow. The left side of the arrow shows a signal source output from the EXT-2 terminal.
FEATURES Refer to “Using the TV’s menu” (see page 23) for details of To set the CHILD LOCK function displaying the menu. 1 Choose CHILD LOCK, then press the o button FEATURES “SET ID NO.” (ID number setting screen) appears. SLEEP TIMER BLUE BACK CHILD LOCK...
FEATURES 3 Press the number buttons to enter the ID number The lock is temporarily released so you can view the TV channel. If you have forgotten the ID number: Perform step 1 of “To set the CHILD LOCK function”. After confirming the ID number, press the b button to exit the menu.
INSTALL Refer to “Using the TV’s menu” (see page 23) for details of • You can now edit the programme numbers (PR) displaying the menu. using the EDIT/MANUAL function. For details, see “EDIT/MANUAL” on page 35. • If you do not need to use the EDIT/MANUAL INSTALL function, go to the next step.
INSTALL 3 Press the a a button to complete the settings EDIT/MANUAL The T-V LINK menu appears. The EDIT/MANUAL functions are divided into two types: • editing the current programme numbers (PR) (EDIT T-V LINK functions); and DOWNLOAD • manually storing a TV channel you want to view on a BACK particular programme number (PR) (MANUAL function).
Seite 38
INSTALL INSERT Preparation: 1 Press the 6 6 buttons to choose a TV channel • A CH/CC number unique to this TV and corresponding Every time you press the 6 buttons, the programme to the Channel number of a TV channel is required. Find number (PR) changes and the picture of the TV channel the corresponding CH/CC number from a table “CH/CC stored in the programme number (PR) appears on the...
Seite 39
INSTALL DELETE 4 Press the green or red button to search for a TV channel 1 Press the 6 6 buttons to choose a TV channel Scanning stops when the TV finds a TV channel. Then Every time you press the 6 buttons, the programme the TV channel is displayed.
Additional menu operations Using the ACI function Downloading data to a VCR This TV has an ACI function which decodes the ACI You can send the latest programme numbers (PR) data to a (Automatic Channel Installation) data. VCR with the T-V LINK function. Using the ACI function allows all TV channels transmitted •...
Additional menu operations Changing the COUNTRY setting Using the DECODER (EXT-2) function After the AUTO PROGRAM function is completed, you If you have a decoder connected to a T-V LINK compatible can change the country you have already set by using the VCR, which in turn is connected to the EXT-2 terminal, use AUTO PROGRAM function.
Additional preparation Connecting external equipment 1 VCR (composite signal) Connect the equipment to the TV, making the correct rear panel and front panel connections. 2 VCR (composite signal/S-VIDEO signal) 3 T-V LINK compatible VCR (composite signal/S-VIDEO Before connecting anything: signal) •...
Additional preparation Equipment which can output the S-VIDEO Connecting Speakers/Amplifier signal (Y/C signal) such as an S-VHS VCR See the Audio equipment connection diagram, then connect the audio equipment you desire to the TV. Connect the equipment to an EXT terminal (but not the You can use external front speakers to listen to the TV EXT-1 terminal).
CH/CC numbers When you want to use the INSERT function on page 36, find the CH/CC number corresponding to the Channel number of the TV channel from this table. Channel Channel Channel Channel CH 02 / CH 202 E2, R1, IR A CH 40 / CH 240 E40, R40 CC 01 / CC 201...
Troubleshooting If a problem arises while you are using the TV, please read this troubleshooting guide carefully before you ask to have the TV repaired. You may be able to fix it easily by yourself. For example, if the mains plug is disconnected from the mains outlet, or the TV aerial has problems, you may think there is a problem with the TV itself.
Seite 46
Troubleshooting Other issues • When the SLEEP TIMER function operates, the TV is automatically turned off. If the TV suddenly turns off, try to press the # (standby) button to turn on the TV once again. If the TV goes back to normal, there is no problem.
Specifications Model PD-42D30ES Item Broadcasting systems CCIR B/G, I, D/K, L Colour systems PAL, SECAM • The EXT terminals also support the NTSC 3.58/4.43 MHz system. Channels and frequencies • E2-E12, E21-E69, S1-S41, X, Y, Z, Z+1, Z+2, ITALY A-H, ITALY H+1, ITALY H+2, F2-F10, F21-F69, R1-R12, R21-R69, IR A-J •...
Seite 49
Vielen Dank für den Erwerb dieses Farbfernsehers von JVC. Um sicherzustellen, dass Sie Ihr neues Fernsehgerät richtig bedienen können, lesen Sie diese Anleitung sorgfältig, bevor Sie beginnen. ACHTUNG: ZUR VERMEIDUNG VON FEUER ODER ELEKTRISCHEM SCHLAG SETZEN SIE DIESES GERÄT KEINEM REGEN ODER FEUCHTIGKEIT AUS.
Eingebranntes Bild Eine besondere Eigenschaft von Plasma Display Panels (PDPs) ist die, dass die Anzeige ein und desselben Bildes für längere Zeit dazu führt, dass Teile davon niemals mehr verschwinden (Einbrennen in die Phosphorschicht). Vermeiden Sie ein Einbrennen wie folgt. Lassen Sie keine Standbilder oder Textzeilen für längere Zeit anzeigen.
Pixelfehler PDPs benutzen zur Darstellung der Bilder Gruppen von kleinen Pixeln (Picture Elements). Mehr als 99.99% all dieser Pixel funktionieren fehlerfrei, aber haben Sie bitte dafür Verständnis, dass eine kleine Zahl von Pixeln nicht oder nicht immer leuchten. Stellen Sie den Fernseher nicht in der Nähe von elektronischen Geräten auf, die empfindlich auf elektromagnetische Wellen reagieren.
Seite 52
Verwendung der PIP-Funktion ......19 Verwendung der ACI-Funktion......38 Verwendung der MULTI-BILD-Funktion...20 Herunterladen (Download) der Daten zum Bedienung eines Videorekorders (VCR) oder Videorekorder..........38 DVD-Spielers von JVC........20 Ändern der LAND-Einstellung ......39 Verwendung der DECODER Videotext-Funktion .......21 (EXT-2)-Funktion .......... 39 Allgemeine Bedienung ........21 Zusätzliche Vorbereitungen....
Paketinhalt prüfen Der Fernseher und die Komponenten sind in drei Einheiten verpackt. Prüfen Sie, ob alle Komponenten vorhanden sind. Wenden Sie sich bitte sofort an Ihren Händler, falls Teile fehlen sollten. Fernsehgerät Systemkabel Fernbedienung MEN U TV/A V Fernsehgerät Netzkabel Befestigungsschraube ×...
Aufbau und Anschluss Ihres Fernsehgerätes • Benutzen Sie den Standfuß, der für Ihr Fernsehgerät gedacht ist. Näheres zur Montage des Standfußes erfahren Sie in der Anleitung des Standfußes. • Stellen Sie sicher, dass die Wandmontage des Gerätes von einem erfahrenen Monteur durchgeführt wird. Montage der vorderen Lautsprecher, und Vorbereitung des Subwoofers Montage der vorderen Lautsprecher Montieren Sie die mitgelieferten DD-Lautsprecher an den linken uind rechten Seiten des Fernsehers.
Aufbau und Anschluss Ihres Fernsehgerätes Aufstellung Vorsichtsmaßnahmen vor der Aufstellung • Kippen Sie das Gerät nicht nach links oder rechts, oder nach hinten. • Installieren Sie das Fernsehgerät in einer Raumecke oder auf dem Boden, damit später keine Kabel im Weg liegen können. •...
Anschlüsse Vorsicht • Schalten Sie alle beteiligten Geräte einschließlich des Fernsehers aus, bevor Sie irgendwelche Verbindungen herstellen. Anschlussbeispiel AC INPUT 110-240V Mit dem Gerät geliefertes Kabel • Lesen Sie auf Seite 12 für Näheres zu den Anschlüssen. Fernsehgerät (Rückseite) Lautsprecher vorne links Lautsprecher vorne rechts DISPLAY INPUT...
Anschlüsse Anschließen der vorderen Lautsprecher und des Subwoofers Benutzen Sie die mitgelieferten Lautsprecherkabel, um die Lautsprecher an den Anschlüssen an der Rückseite des Fernsehers anzuschließen. Anschließen des Lautsprecherkabels am Anschluss der vorderen Lautsprecher Stellen Sie die Verbindung mit den für die vorderen Lautsprecher mitgelieferten Kabeln her (etwa 1,2 m lang). 1 Drücken Sie den gefederten Hebel des 2 Stecken Sie die blanke Ader des Kabels in den Lautsprecheranschlusses in Pfeilrichtung...
Anschlüsse Zusammenbinden der Lautsprecherkabel Benutzen Sie die beiliegenden Kabel-Clips, um die Lautsprecherkabel zusammen zu binden. Kabel-Clip Lautsprecherkabel • Ziehen Sie das Schutzpapier von der Klebeseite der Kabel-Clips ab und bringen Sie diesen an der gewünschten Stelle an. Um sicherzustellen, dass der Kabel-Clip richtig montiert ist, warten Sie einige Minuten, bevor Sie die Kabel in den Clip einführen. •...
Anschlüsse Anschließen von Antenne und Antenne Videorekorder Rückseite des 75-Ohm-Koaxialkabel • Die Anschlusskabel werden nicht mitgeliefert. Empfängers • Für weitere Einzelheiten lesen Sie auch die Anleitungen der anzuschließenden Geräte. EXT- EXT- Wenn Sie einen Videorekorder anschließen möchten, folgen Sie A A A A → B B B B → C C C C . EXT- EXT- Wenn Sie keinen Videorekorder anschließen,...
Anschlüsse Stecken Sie den Netzstecker in eine ordnungsgemäß Anschließen des Netzkabels an der geerdete Steckdose. Netzsteckdose Stecken Sie die Netzstecker der Netzkabel von Fernseher und Empfänger in zwei geeignete Netzsteckdosen. Vorsicht • Betreiben Sie das Gerät nur an einer Stromquelle der am Gerät angegebenen Spannung (110 –...
Programmierung) verwenden, um die ACI-Daten zu auf der Fernbedienung, um das Gerät einzuschalten. dekodieren und die Registrierung aller Fernsehkanäle in • Das JVC-Logo erscheint nicht mehr, wenn das Gerät kurzer Zeit zu beenden. Einzelheiten über die ACI- bereits einmal eingeschaltet wurde. Benutzen Sie in Funktion und ihre Verwendung siehe “Verwendung der...
Kabel an der Buchse EXT-2 am Fernseher angeschlossen sein. Fernsehers aufnehmen, wenn der Sender am Fernseher “T-V LINK-kompatible Videorekorder” sind z. B. JVC- zu empfangen ist. Näheres erfahren Sie in der Anleitung Videorekorder mit dem Logo T-V LINK, oder ein Rekorder Ihres Videorekorders.
Die Tasten am Fernsehgerät und deren Funktionen Einschalten des Fernsehers aus dem Vorderes Display Standby-Modus Drücken Sie die Taste A A A A oder Tasten P p p , um den Fernseher aus der Bereitschaft einzuschalten • Prüfen Sie, ob die Netzstecker der Netzkabel von Fernseher und Empfänger in zwei geeignete Netzsteckdosen eingesteckt sind.
Tasten und Funktionen der Fernbedienung Benutzen Sie PR LISTE: Mit der PR LISTE: 1 Drücken Sie die Taste h h (Information) zur 1 Drücken Sie die Taste h h (Information) zur Anzeige der PR LISTE Anzeige der PR LISTE Wenn Sie die Taste h (Information) drücken, ändert 2 Drücken Sie die Tasten 5 5 und 6 6 , um eine...
Tasten und Funktionen der Fernbedienung Wählen Sie den ZOOM-Modus ZOOM-Funktion 1 Drücken Sie die Taste c c zur Anzeige des Sie können die Bildgröße entsprechend dem Menüs ZOOM Bildseitenverhältnis einstellen. Wählen Sie aus den folgenden ZOOM Modi die Beste aus. ZOOM AUTO AUTO:...
Tasten und Funktionen der Fernbedienung Anzeige der aktuellen Uhrzeit Verwendung der PIP-Funktion Sie können die aktuelle Uhrzeit auf dem Bildschirm Sie können zwei Bildsignale gleichzeitig betrachten darstellen lassen. (Hauptbild und Bild im Bild). Zwei verschiedene Fernsehprogramme, oder ein Drücken Sie zur Anzeige der aktuellen Uhrzeit die Fernsehprogramm und das Bild einer externen Video- Taste h h (Information)
• Die Funktion BLAU-BILD arbeitet nicht im Sie können einen Videorekorder oder DVD-Spieler von Zwillingsbild- oder Bild-in-Bild-Modus. JVC fernbedienen. Wenn Sie eine Taste mit dem gleichen Symbol wie auf der geräteeigenen Fernbedienung drücken, • Ein progressive-scanning-Bild kann nicht als Bild im Bild angezeigt werden.
Videotext-Funktion Verwendung des Listenmodus Sie können die Nummern Ihrer bevorzugten Videotext- MENU Seiten abspeichern und sie mit den Farbtasten abrufen. Seitennummern speichern: 1 Drücken Sie die Taste B B , um den Listenmodus zu aktivieren Die gespeicherten Seitennummern erscheinen unten auf dem Bildschirm.
Videotext-Funktion Unter-Seiten Abbrechen Einige Videotext-Seiten haben Unter-Seiten, die Sie können nach einer Videotext-Seite suchen lassen, automatisch angezeigt werden. während Sie fernsehen. Sie können Unter-Seiten beliebig halten bzw. jederzeit 1 Drücken Sie die Zifferntasten zur Eingabe der betrachten. Seitennummer, oder drücken Sie eine der 1 Drücken Sie die Taste D D (Unter-Seiten), um die Farbtasten...
Bedienung des Menüs des Fernsehers Dieses Gerät hat viele Funktionen, die per Menü bedient 5 Drücken Sie die Taste a a , um die Einstellung werden. Um alle Funktionen Ihres Fernsehers nutzen zu abzuschließen können, sollten Sie die grundsätzliche Menübedienung Das Menü...
BILD EINSTELLUNG Lesen Sie “Bedienung des Menüs des Fernsehers” (siehe FARBTEMP. Seite 23) für Näheres zur Anzeige der Menüs. Sie können einen von drei FARBTEMP.-Modi BILD EINSTELLUNG (verschiedene Weißtöne) auswählen, um den Weißabgleich BILDEINST. für das Bild einzustellen. Da die Farbe Weiß als Referenz HART KONTRAST HELLIGKEIT...
BILD VARIANTEN Lesen Sie “Bedienung des Menüs des Fernsehers” (siehe Super DigiPure Seite 23) für Näheres zur Anzeige der Menüs. Die Funktion Super DigiPure verwendet neueste digitale BILD VARIANTEN Technologien, um ein natürlich wirkendes Bild zu DIGITAL VNR AUTO erzeugen. Die Funktion Super DigiPure enthält die Super DigiPure AUTO EMPFANGSSYSTEM...
BILD VARIANTEN EMPFANGSSYSTEM 4:3 AUTO ZOOM Die Fernsehnorm (bzw. das Farbsystem) wird automatisch Für das ZOOM Normalbild (Seitenverhältnis 4:3) können gewählt. Wenn das Bild jedoch nicht klar ist, oder keine Sie eine von drei ZOOM-Betriebsarten wählen, NORMAL, Farbe erscheint, wählen Sie die Fernsehnorm von Hand. PANORAMIC oder 14:9 ZOOM.
BILD VARIANTEN PIP POSITION: Sie können eine von vier Positionen für das Nebenbild wählen. 1 Drücken Sie die Tasten 6 6 , um PIP zu wählen. Drücken Sie dann die Taste a Das Menü PIP erscheint. PIP POSITION MULTI-BILD ZURÜCK D0061-GE 2 Drücken Sie die Tasten 6 6 , um PIP POSITION...
SOUND EINSTELLUNG Lesen Sie “Bedienung des Menüs des Fernsehers” (siehe LAUTSPRECHER Seite 23) für Näheres zur Anzeige der Menüs. Sie können die Tonausgabe der TV-Lautsprecher SOUND EINSTELLUNG abschalten. Dies ist beispielsweise sinnvoll, wenn ein STEREO/ Audiosystem als Ersatz für die TV-Lautsprecher TIEFEN HÖHEN angeschlossen ist.
Seite 77
SOUND EINSTELLUNG KOPFHÖRER Sie müssen das Menü KOPFHÖRER aufrufen, um die Kopfhörerlautstärke einstellen zu können. Im Menü KOPFHÖRER können Sie auch einstellen, ob der Ton aus den Lautsprechern kommen soll, wenn Kopfhörer angeschlossen werden, und Sie können weitere Einstellungen für das Signal vornehmen, das die Kopfhörer wiedergeben sollen.
EXT EINSTELLUNG Lesen Sie “Bedienung des Menüs des Fernsehers” (siehe ID LISTE Seite 23) für Näheres zur Anzeige der Menüs. Sie können die EXT-Eingänge je nach angeschlossenem EXT EINSTELLUNG Gerät benennen. Bei der Vergabe eines Namens für einen EXT-1 EXT-Anschluss erscheinen die EXT-Anschlussnummer ÜBERSPIELEN und der Name am Bildschirm.
Seite 79
EXT EINSTELLUNG 2 Drücken Sie die Tasten 6 6 , um eine EXT- Buchse oder TV zu wählen. Drücken Sie dann die Taste a Der Pfeil im Menü stellt den Signalfluss dar. Das linke Ende des Pfeils gibt einen Signalquellenausgang der Buchse EXT-2 an.
FUNKTIONEN Lesen Sie “Bedienung des Menüs des Fernsehers” (siehe Einstellen der Funktion KINDERSICHERUNG Seite 23) für Näheres zur Anzeige der Menüs. 1 Wählen Sie KINDERSICHERUNG und drücken Sie dann die Taste o FUNKTIONEN “GEHEIM CODE” (ID-Nummer einstellen) erscheint. SLEEP TIMER BLAU-BILD KINDERSICHERUNG GEHEIM CODE...
FUNKTIONEN 3 Geben Sie Ihre ID-Nummer mit den Zifferntasten Die Sperrung wird vorübergehend aufgehoben, und Bild und Ton sind freigeschaltet. Wenn Sie die ID-Nummer vergessen haben: Führen Sie Schritt 1 von “Einstellen der Funktion KINDERSICHERUNG” aus. Nachdem Sie die ID- Nummer bestätigt haben, drücken Sie die Taste b zum Verlassen des Menüs.
PROGRAMMIERUNG Lesen Sie “Bedienung des Menüs des Fernsehers” (siehe • Sie können jetzt mit der Bearbeitung der Seite 23) für Näheres zur Anzeige der Menüs. Programmnummern (PR) in der Funktion SENDER ORDNEN/MANUELL fortfahren. Für Einzelheiten lesen Sie bitte “SENDER ORDNEN/MANUELL” PROGRAMMIERUNG auf Seite 35.
PROGRAMMIERUNG 3 Drücken Sie die Taste a a , um die Einstellung SENDER ORDNEN/MANUELL abzuschließen Die Funktionen SENDER ORDNEN/MANUELL sind in Das Menü T-V LINK erscheint. zwei Typen unterteilt: Bearbeitung der aktuellen Programmnummern (PR) (SENDER ORDNEN- T-V LINK Funktionen) und manuelle Speicherung von Fernsehkanälen DATENTRANSFER TV unter einer Programmnummer (PR) (MANUELL- Funktion).
Seite 84
PROGRAMMIERUNG EINFÜGEN Vorbereitung: 1 Wählen Sie mit den Tasten 6 6 einen • Es wird die CH/CC-Nummer benötigt, die Fernsehkanal ausschließlich in diesem Fernsehgerät existiert und der Mit jedem Druck auf die Tasten 6 ändert sich die Kanalnummer eines Fernsehkanals enspricht. Suchen Programmnummer (PR) und das Bild des Senders mit Sie die entsprechende CH/CC-Nummer in einer Tabelle dieser Programmnummer (PR) wird angezeigt.
Seite 85
PROGRAMMIERUNG LÖSCHEN 5 Drücken Sie so oft die grüne oder die rote Taste, bis Sie den gewünschten Sender 1 Wählen Sie mit den Tasten 6 6 einen gefunden haben Fernsehkanal Mit jedem Druck auf die Tasten 6 ändert sich die Bei schlechtem Empfang: Programmnummer (PR) und das Bild des Senders mit Drücken Sie die blaue oder die gelbe Taste, um den...
Zusätzliche Menüfunktionen Verwendung der ACI-Funktion Herunterladen (Download) der Daten zum Videorekorder Dieses Fernsehgerät hat eine ACI-Funktion, die ACI- (automatische Programmierung) Daten dekodiert. Sie können die aktuellen Daten aller Programmnummern Mit der ACI-Funktion können alle Fernsehkanäle, die von (PR) mit der Funktion T-V LINK an den Videorekorder Kabelfernsehsendern übertragen werden, schnell und senden.
Zusätzliche Menüfunktionen Ändern der LAND-Einstellung Verwendung der DECODER (EXT-2)- Funktion Nachdem die Funktion AUTO abgeschlossen ist, können Sie mit der Funktion AUTO das bereits eingestellte Land Wenn Sie einen Decoder anschließen, während am Eingang ändern. T-V LINK ein EXT-2-kompatibler Videorekorder Beim Speichern von Fernsehkanälen für französische angeschlossen ist, müssen Sie die Funktion DECODER Sender (SECAM-L-System) führen Sie folgende Schritte...
Zusätzliche Vorbereitungen Anschluss externer Geräte 1 Videorekorder (Composite-Signal) Schließen Sie die Geräte unter Beachtung der folgenden Anschlussdiagramme an Ihrem Fernseher an. 2 Videorekorder (Composite/S-VIDEO-Signal) 3 T-V LINK-kompatibler Videorekorder (Composite-/ Bevor Sie Verbindungen herstellen: S-VIDEO-Signal) • Lesen Sie die Anleitungen aller beteiligten Geräte. 4 Decoder Abhängig von den Geräten unterscheidet sich die 5 DVD-Spieler (Composite-/S-VIDEO-Signal)
Zusätzliche Vorbereitungen Geräte, die das S-VIDEO-Signal (Y/C-Signal) Anschließen von Lautsprechern/Verstärker z.B. von einem Videorekorder S-VHS Schließen Sie unter Beachtung der Anschlußzeichnung für Audiogeräte die gewünschten Audiogeräte am Fernsehgerät ausgeben können Schließen Sie das Gerät an einen EXT-Anschluss (mit Zur Tonwiedergabe können Sie anstelle der TV- Ausnahme des EXT-1-Anschlusses) an.
CH/CC-Nummern Wenn Sie die EINFÜGEN-Funktion (beschrieben unter Seite 36) benutzen möchten, finden Sie mit Hilfe dieser Tabelle die CH/CC- Nummer heraus, die der Kanalnummer des Fernsehkanals entspricht. Kanal Kanal Kanal Kanal CH 02 / CH 202 E2, R1 CH 40 / CH 240 E40, R40 CC 01 / CC 201 CC 31 / CC 231...
Problemlösungen Wenn bei der Benutzung Ihres Fernsehgerätes ein Problem auftreten sollte, lesen Sie bitte sorgfältig diese “Problemlösungen” durch, bevor Sie das Gerät in Reparatur geben. Eventuell können Sie das Problem leicht selbst beheben. Wenn z. B. der Netzstecker nicht in der Steckdose steckt, oder, wenn es Probleme mit der Empfangsantenne gibt, könnten Sie irrtümlicherweise annehmen, dass der Fernseher defekt ist.
Seite 92
Problemlösungen Verschiedenes • Wenn die Funktion SLEEP TIMER aktiv ist, schaltet sich das Gerät automatisch aus. Wenn dies passiert, drücken Sie die Taste # (Standby), um den Fernseher wieder einzuschalten. Wenn sich das Gerät nun wieder normal verhält, liegt keine Fehlfunktion vor. •...
Technische Daten Modell PD-42D30ES Eintrag Sendesysteme CCIR B/G, I, D/K, L Fernsehnormen PAL, SECAM • Die Anschlüsse EXT unterstützen auch das NTSC 3.58/4.43 MHz-System. Kanäle und Frequenzen • E2-E12, E21-E69, S1-S41, X, Y, Z, Z+1, Z+2, ITALIEN A-H, ITALIEN H+1, ITALIEN H+2, F2-F10, F21-F69, R1-R12, R21-R69 •...
Seite 95
Merci d’avoir fait l’acquisition de ce téléviseur couleurs JVC. Pour être certain que vous comprenez comment utiliser votre nouveau téléviseur, nous vous conseillons de lire attentivement le présent manuel avant de commencer. AVERTISSEMENT: POUR EVITER TOUT RISQUE D’INCENDIE OU DE CHOC ELECTRIQUE, N’EXPOSEZ JAMAIS CET APPAREIL A LA PLUIE OU A L’HUMIDITE.
Seite 96
Rémanence Une des caractéristique des écrans plasma (PDP) est que l’affichage prolongé d’une même image grave une partie de cette image à l’écran (c’est ce que l’on appelle la rémanence). Pour éviter la rémanence: N’affichez pas d’images ou de caractères statiques pour des périodes prolongées. Pendant l’affichage d’une image Avec alimentation coupée 19:03...
Seite 97
Points défectueux Les écrans au plasma font appel à des ensembles de points (pixels) fins pour afficher les images. Si plus de 99,99% de ces pixels ne présentent aucun problème, il faut savoir qu’il est possible qu’un nombre infime de pixels puisse ne pas s’allumer ou rester allumé en permanence.
Seite 98
Modification du réglage PAYS ......39 MULTIPLES ..........20 Utilisation de la fonction DECODEUR Utilisation d’un VCR ou d’un lecteur DVD de (EXT-2) ............39 marque JVC ..........20 Autres préparatifs ........ 40 Fonction télétexte.........21 Raccordement des appareils externes.... 40 Fonctionnement de base .........21 Numéros CH/CC ........
Vérification du contenu des conditionnements Le téléviseur et ses composants sont livrés en trois colis. Vérifiez que tous les éléments sont bien présents. En cas d’absence d’un élément, veuillez prendre immédiatement contact avec votre distributeur. Téléviseur Câble système Télécommande MEN U TV/A V Téléviseur Cordon...
Installation du téléviseur • Utilisez le support prévu pour ce téléviseur. Pour plus de détails sur la manière de fixer ce support, reportez-vous à son manuel de l’utilisateur. • Faites fixer le téléviseur au mur par un installateur expérimenté. Montage des haut-parleurs avant et préparation du subwoofer Montage des haut-parleurs avant Montez les haut-parleurs DD fournis à...
Installation du téléviseur Installation Précautions pour l’installation • Ne basculez pas le téléviseur vers la droite ou la gauche ni vers l’arrière. • Installez le téléviseur dans un coin, sur le mur, ou sur le sol, de manière à ne pas laisser de câbles dans le passage. •...
Raccordements Attention • Avant d’effectuer tout raccordement, mettez tous les équipements hors tension, y compris le téléviseur. Schéma de raccordement AC INPUT 110-240V Câble fourni avec le téléviseur • Reportez-vous à la page page 12 pour plus de détails sur le raccordement.
Raccordements Connexion des haut-parleurs avant et du subwoofer Utilisez les câbles de haut-parleurs fournis pour raccorder les haut-parleurs aux bornes de haut-parleurs à l’arrière du téléviseur. Raccordement du câble de haut-parleur à la borne de haut-parleur avant Effectuez le raccordement à l’aide des câbles de haut-parleurs avant fournis (longueur d’environ 1,2 m). 1 Appuyez sur le levier à...
Raccordements Mise en faisceau des câbles de haut-parleurs Utilisez les serre-câbles fournis pour réunir les câbles de haut-parleurs après les avoir raccordés. Serre-câble Câbles de haut-parleurs • Décollez le papier du dos du serre-câble et fixez ce dernier à l’endroit voulu. Pour permettre une bonne fixation du serre-câble, attendez quelques minutes avant d’y insérer les câbles des haut-parleurs.
Raccordements Raccordement de l’antenne et du Antenne magnétoscope Câble coaxial à 75 ohms • Les câbles de connexion ne sont pas fournis. Arrière du récepteur • Pour plus de détails, consultez les manuels livrés avec les appareils à raccorder. EXT- EXT- En cas de raccordement d’un magnétoscope, suivez les points A A A A →...
Raccordements Insérez la fiche CA dans une prise correctement reliée à la Raccordement des cordons terre. d’alimentation aux prises secteur Insérez les fiches des cordons d’alimentation du téléviseur et du récepteur dans les prises secteur. Attention • Ne raccordez les appareils qu’à la source d’alimentation spécifiée (CA 110 –...
A sa première mise sous tension, le téléviseur entre en mode 3 Appuyez sur les touches 5 5 et 6 6 pour de réglage initial et le logo JVC s’affiche. Suivez les sélectionner FRANÇAIS. Appuyez ensuite sur la instructions qui apparaissent à l’écran pour effectuer les touche a réglages initiaux.
Un magnétoscope compatible “T-V LINK” est un l’écran, même si le magnétoscope ne parvient pas à le magnétoscope JVC possédant le logo T-V LINK ou un recevoir clairement. Pour plus de détails, consultez le magnétoscope muni d’un des logos suivants. Ces manuel d’utilisation de votre magnétoscope.
Touches et fonctions du téléviseur Mise en fonction de l’appareil à partir Avant de l’écran du mode de veille Appuyez sur la touche A A A A ou sur la touche P p pour mettre le téléviseur en fonction à partir du mode de veille •...
Touches de la télécommande et leurs fonctions 1 Touche de coupure du son 2 Touches numériques 3 Touche c 4 Touche son 3 5 Touche d’informations 6 Touche b 7 Touches 5 8 Touche de veille (Standby) 9 Touches de couleur 0 Touche a - Touches 6 = Touche de commande VCR/DVD/Télétexte...
Touches de la télécommande et leurs fonctions Utilisation de la LISTE PROG.: Utilisation de la LISTE PROG.: 1 Appuyez sur la touche h h (Informations) pour 1 Appuyez sur la touche h h (Informations) pour afficher la LISTE PROG. afficher la LISTE PROG. L’utilisation de la touche h (Informations) modifie 2 Appuyez sur les touches 5 5 et 6...
Touches de la télécommande et leurs fonctions Sélection du mode ZOOM Fonction ZOOM 1 Appuyez sur la touche c c pour afficher le Vous pouvez modifier la taille de l’écran en fonction du menu ZOOM format de l’image. Choisissez le réglage optimal parmi les modes ZOOM suivants.
Touches de la télécommande et leurs fonctions Affichage de l’heure Utilisation de la fonction PIP Vous pouvez afficher l’heure à l’écran. Il est possible de visualiser deux images (l’image principale et une image secondaire). Appuyez sur la touche h h (Informations) pour Cette fonction permet de regarder deux programmes TV en afficher l’heure même temps, ou de regarder simultanément un programme...
JVC. Cette fonction permet de retrouver facilement un programme • Même si votre appareil est de la marque JVC, il se que l’on souhaite regarder. peut que certaines de ces touches ne fonctionnent pas, selon l’appareil utilisé.
Fonction télétexte Utilisation du mode Liste Il est possible de mémoriser les numéros de vos pages de MENU télétexte favorites pour pouvoir les rappeler rapidement à l’aide des touches de couleur. Pour mémoriser les numéros des pages: 1 Appuyez sur la touche B B pour activer le mode Liste Les numéros de pages mémorisés s’affichent dans le bas...
Fonction télétexte Page secondaire Annulation Certaines pages de télétexte comprennent des pages Vous pouvez rechercher une page de télétexte tout en secondaires qui s’affichent automatiquement. regardant la télévision. Vous pouvez garder affichée toute page secondaire ou la 1 Appuyez sur une touche numérique pour entrer visualiser à...
Utilisation du menu du téléviseur Ce téléviseur est équipé d’un certain nombre de fonctions 5 Appuyez sur la touche a a pour valider le que vous pouvez activer ou désactiver à l’aide de menus. réglage Pour tirer le meilleur parti de toutes ses fonctions, il vous Le menu disparaît.
REGLAGE IMAGE Reportez-vous à la section “Utilisation du menu du TEINTE téléviseur” (voir page 23) pour plus de détails sur l’affichage du menu. Il existe trois modes TEINTE (trois nuances de blanc) permettant de régler l’équilibre du blanc dans l’image. Etant REGLAGE IMAGE donné...
OPTIONS IMAGE Reportez-vous à la section “Utilisation du menu du Super DigiPure téléviseur” (voir page 23) pour plus de détails sur l’affichage du menu. La fonction Super DigiPure fait appel aux dernières techniques numériques pour vous fournir une image à OPTIONS IMAGE l’aspect naturel.
OPTIONS IMAGE SYSTEME COULEUR EFFET CINEMA Le système couleurs est sélectionné automatiquement. La fonction EFFET CINEMA permet d’afficher de manière Cependant, si l’image n’est pas nette ou si aucune couleur plus douce et plus naturelle à l’écran les films au format n’apparaît, vous devez sélectionner manuellement le cinéma .
OPTIONS IMAGE POSITION PIP: Quatre positions sont possibles pour l’image secondaire. 1 Appuyez sur les touches 6 6 pour sélectionner PIP. Appuyez ensuite sur la touche a Le menu PIP apparaît. POSITION PIP IMAGES MULTIPLES RETOUR D0061-FR 2 Appuyez sur les touches 6 6 pour sélectionner POSITION PIP 3 Appuyez sur les touches 5...
REGLAGE AUDIO Reportez-vous à la section “Utilisation du menu du HAUT PARLEUR téléviseur” (voir page 23) pour plus de détails sur l’affichage du menu. Si un système audio est relié au téléviseur pour remplacer les haut-parleurs du téléviseur, vous pouvez couper le son REGLAGE AUDIO de ces derniers.
Seite 123
REGLAGE AUDIO CASQUE Pour régler le volume du casque d’écoute, utilisez le menu CASQUE. Le menu CASQUE permet également de décider si oui ou non les haut-parleurs du téléviseur doivent continuer à fonctionner lorsque l’on utilise le casque d’écoute, et d’effectuer les différents réglages du casque.
EXT REGLAGES Reportez-vous à la section “Utilisation du menu du LISTE NOMS téléviseur” (voir page 23) pour plus de détails sur l’affichage du menu. Vous pouvez assigner un nom aux appareils raccordés à chaque entrée EXT. L’attribution d’un nom à une borne EXT REGLAGES EXT entraîne l’affichage du numéro de la borne EXT et de EXT-1...
Seite 125
EXT REGLAGES 2 Appuyez sur les touches 6 6 pour sélectionner une borne EXT ou TV. Appuyez ensuite sur la touche a La flèche dans le menu représente le débit des signaux. Le côté gauche de la flèche indique la diffusion d’une source de signaux par la borne EXT-2.
OPTIONS Reportez-vous à la section “Utilisation du menu du VERROUILLAGE téléviseur” (voir page 23) pour plus de détails sur l’affichage du menu. Lorsque vous souhaitez que vos enfants ne regardent pas certains canaux, vous pouvez utiliser la fonction OPTIONS VERROUILLAGE pour verrouiller ces derniers. Si l’enfant SLEEP TIMER sélectionne un numéro de programme (PR) sous lequel est FOND BLEU...
OPTIONS Pour regarder une chaîne TV verrouillée CREATEUR DE PIXELS 1 À l’aide des touches numériques ou de la LISTE Lorsque la rémanence est minimale, la rémanence et les PROG., sélectionnez un numéro de programme images résiduelles peuvent être atténuées à l’aide de la (PR) correspondant à...
Seite 128
INSTALLATION Reportez-vous à la section “Utilisation du menu du Après que les chaînes TV ont été enregistrées téléviseur” (voir page 23) pour plus de détails sur sous les numéros de programmes (PR), le l’affichage du menu. menu EDITER s’affiche. • Vous pouvez alors commencer à éditer les numéros de programmes (PR) à...
INSTALLATION 3 Appuyez sur la touche a a pour valider les EDITER/MANUEL réglages Les fonctions EDITER/MANUEL sont divisées en deux Le menu T-V LINK apparaît. types: l’édition des numéros de programme sélectionnés (PR) (fonctions EDITER) et l’enregistrement manuel d’un T-V LINK canal TV de votre choix sous un numéro de programme CHARGEMENT TV (PR) (fonction MANUEL).
Seite 130
INSTALLATION NOMS INSERER Préparation: 1 Appuyez sur les touches 6 6 pour sélectionner • Vous devez disposer pour ce téléviseur d’un numéro un canal TV CH/CC unique et correspondant au numéro de canal Chaque fois que vous appuyez sur les touches 6, le d’un émetteur TV.
Seite 131
INSTALLATION EFFACER 5 Appuyez de manière répétitive sur la touche verte ou rouge jusqu’à ce que le canal TV 1 Appuyez sur les touches 6 6 pour sélectionner souhaité apparaisse un canal TV Chaque fois que vous appuyez sur les touches 6, le Si la réception du canal est mauvaise: numéro de programme (PR) change et l’image du canal Appuyez sur la touche bleue ou jaune pour obtenir une...
Fonctions supplémentaires des menus Utilisation de la fonction ACI Téléchargement de données vers un magnétoscope Ce téléviseur possède une fonction ACI qui décode les données ACI (Installation automatique des canaux). Vous pouvez transmettre les dernières informations de La fonction ACI permet d’enregistrer correctement et numéros de programmes (PR) au magnétoscope à...
Fonctions supplémentaires des menus Modification du réglage PAYS Utilisation de la fonction DECODEUR (EXT-2) Une fois la fonction AUTO terminée, vous pouvez changer le pays que vous avez déjà configuré à l’aide de la fonction Lorsque vous raccordez un décodeur à un magnétoscope AUTO.
Autres préparatifs Raccordement des appareils externes 1 Magnétoscope (signal composite) Raccordez les appareils au téléviseur, en suivant attentivement les schémas de raccordement suivants. 2 Magnétoscope (signal composite/signal S-VIDEO) 3 Magnétoscope compatible T-V LINK (signal Avant de raccorder tout appareil: composite/signal S-VIDEO) •...
Seite 135
Autres préparatifs Appareils pouvant émettre le signal S-VIDEO Raccordement de haut-parleurs/d’un (signal Y/C), un magnétoscope S-VHS par amplificateur exemple Raccordez l’équipement audio souhaité au téléviseur en vous référant au schéma de raccordement de l’équipement Raccordez l’appareil à une entrée EXT autre que l’entrée audio.
Numéros CH/CC Si vous souhaitez utiliser la fonction INSERER de la page 36, localisez dans le tableau suivant le numéro CH/CC correspondant au numéro de canal de l’émetteur TV. Canal Canal Canal Canal CH 02 / CH 202 E2, R1 CH 40 / CH 240 E40, R40 CC 01 / CC 201...
Guide de dépannage En cas de problème pendant l’utilisation du téléviseur, veuillez lire attentivement ce “Guide de dépannage” avant de contacter le service technique. Vous pourrez probablement résoudre le problème par vous-même. Par exemple, si la fiche est débranchée de la prise secteur ou si l’antenne TV présente des problèmes, vous pourriez croire que l’anomalie provient du téléviseur.
Guide de dépannage Autres problèmes • Lorsque la fonction SLEEP TIMER est activée, le téléviseur se met automatiquement hors tension. Si le téléviseur s’éteint subitement, appuyez sur la touche # (veille) pour tenter de le rallumer. Si le téléviseur revient à...
Spécifications techniques Modèle PD-42D30ES Elément Systèmes de radiodiffusion CCIR B/G, I, D/K, L Systèmes couleurs PAL, SECAM • Les bornes EXT acceptent également le système NTSC 3.58/4.43 MHz. Canaux et fréquences • E2-E12, E21-E69, S1-S41, X, Y, Z, Z+1, Z+2, ITALIE A-H, ITALIE H+1, ITALIE H+2, F2-F10, F21-F69, R1-R12, R21-R69 •...
Seite 141
Onze hartelijke dank voor het aanschaffen van deze JVC-kleurentelevisie. Lees deze gebruiksaanwijzing aandachtig door voordat u de TV in gebruik neemt, zodat u zeker weet dat u de TV goed bedient. WAARSCHUWING: OM GEVAAR VOOR BRAND OF ELEKTRISCHE SCHOKKEN TE VOORKOMEN, DIENT U ERVOOR TE ZORGEN DAT DIT APPARAAT NOOIT AAN REGEN OF VOCHTIGHEID WORDT BLOOTGESTELD.
Brandvlek Een kenmerk van plasmaschermen (PDP’s) is dat het weergeven van hetzelfde beeld gedurende een lange tijd tot gevolg heeft dat een gedeelte van het beeld op het scherm achterblijft (fosfor-brandvlek). Vermijd als volgt het inbranden. Toon niet gedurende lange tijd statische beelden of letters. Terwijl een beeld wordt getoond en de spanning uitgeschakeld is 19:03...
Seite 143
Puntstoringen PDP-schermen maken gebruik van hoeveelheden fijne pixels om beelden weer te geven. Als er geen probleem is met meer dan 99,99% van deze pixels, dan moet u er begrip voor hebben dat een zeer klein aantal van deze pixels wellicht niet oplichten of niet altijd oplichten.
Seite 144
Gebruik van de functie PIP ......19 videorecorder ..........38 Gebruik van de functie MULTI-BEELD ....20 Wijziging van de instelling LAND ....39 Een VCR of DVD-speler van het merk JVC Gebruik van de functie DECODER (EXT-2)..39 bedienen............20 Verdere voorbereidingen ....40 Teletekst-functie ........21...
Het controleren van de inhoud van de verpakkingen De TV en de onderdelen worden geleverd in drie dozen. Controleer of alle onderdelen aanwezig zijn. Neem onmiddellijk met uw handelaar contact op als er onderdelen ontbreken. Televisietoestel Systeemkabel Afstandsbediening MEN U TV/A V Televisietoestel Netsnoer...
Uw TV installeren • Gebruik de standaard die voor dit toestel is ontworpen. Zie de gebruikershandleiding van de standaard voor details over de bevestiging ervan. • Laat het televisietoestel door een vakbekwame installateur aan de wand aanbrengen. De voorste luidsprekers monteren en de subwoofer voorbereiden De voorste luidsprekers monteren Monteer de meegeleverde DD-luidsprekers aan de linker-en rechterzijde van het televisietoestel.
Uw TV installeren Installatie Waar bij de installatie op gelet moet worden • Kantel het televisietoestel niet naar links, rechts of naar achteren. • Installeer het televisietoestel in een hoek aan een wand of op de vloer op zodanige wijze, dat de kabels uit de weg blijven. •...
Aansluitingen Let op • Schakel alle apparatuur uit, inclusief de TV, voordat u iets aansluit. Aansluitschema AC INPUT 110-240V Met het toestel meegeleverde kabel • Zie pagina 12 voor aansluitgegevens. Televisietoestel (achterkant) Voorste luidspreker links Voorste luidspreker rechts DISPLAY INPUT CONNECT TO SYSTEM CABLE FRONT FRONT...
Aansluitingen Het aansluiten van de voorste luidsprekers en de subwoofer Gebruik de meegeleverde luidsprekerkabels om de luidsprekers aan de luidsprekeraansluitingen aan de achterkant van het televisietoestel aan te sluiten. Het aansluiten van de luidsprekerkabel aan de aansluitingen van de voorste luidspreker Sluit deze aan met gebruikmaking van de bijbehorende meegeleverde luidsprekerkabels (ongeveer 1,2 m lengte).
Aansluitingen Het bundelen van luisprekerkabels Gebruik de meegeleverde kabelklemmen om de aangesloten luidsprekerkabels te bundelen. Kabelklem Luidsprekerkabels • Verwijder het papier aan de achterzijde van de kabelklem en bevestig deze op de gewenste plaats. Om er zeker van te zijn dat de kabelklem stevig blijft zitten, dient u enkele minuten te wachten voordat u de luidsprekerkabels in de klem steekt.
Aansluitingen Aansluiten van de antenne en de Antenne videorecorder 75-ohms coaxiaalkabel Achterkant van de • De aansluitsnoeren worden niet bijgeleverd. ontvanger • Zie voor meer details hierover de gebruiksaanwijzingen van de apparatuur die u wilt aansluiten. EXT- EXT- Als u een videorecorder aansluit, volg dan A A A A →...
Aansluitingen Achterkant ontvanger Aansluiten van het netsnoer op het stopcontact Steek de stekkers van de netsnoeren van het televisietoestel en van de ontvanger in een stopcontact van het lichtnet. Let op DISPLAY OUT EXT- EXT- • Sluit het apparaat nooit aan op een andere voltage dan EXT- voorgeschreven (110 –...
Seite 153
“Gebruik van de functie ACI” op pagina 38 voor nadere zetten. bijzonderheden over het gebruik van de functie ACI. • Het JVC-logo verschijnt niet als de TV eenmaal is Wilt u de functie ACI niet gebruiken, druk dan op de ingeschakeld. In dit geval gebruikt u de functies 6-toetsen om ACI OVERSLAAN te kiezen en druk “TAAL”...
Met een “T-V LINK-compatibele videorecorder ” wordt Als de weergave van de videorecorder begint, wordt de TV een JVC-videorecorder bedoeld met het T-V LINK-logo of automatisch ingeschakeld en het beeld van de aansluiting een videorecorder met een van de volgende logo's. Deze EXT-2 wordt weergegeven op het TV-scherm.
TV-knoppen en -functies Zet de TV aan vanuit stand-by Displayfront Druk op de A A A A -toets of P p p -toetsen om de TV vanuit de stand-by-stand in te schakelen. • Controleer of de stekkers van de netsnoeren van het televisietoestel en de ontvanger correct zijn aangesloten.
Afstandsbedieningstoetsen en functies Gebruik de PR LIJST: Gebruik de PR LIJST: 1 Druk op de toets h h (Informatie) om de PR 1 Druk op de toets h h (Informatie) om de PR LIJST weer te geven LIJST weer te geven Bij iedere druk op de toets h (Informatie) verandert de 2 Druk op de 5 5 - en6...
Afstandsbedieningstoetsen en functies Kies de ZOOM-instelling ZOOM-functie 1 Druk op de toets c c om het menu ZOOM Het beeldformaat kan worden gewijzigd, om dit aan te weer te geven passen aan de beeldverhouding. Kies de beste optie uit een van de volgende ZOOM-instellingen.
Afstandsbedieningstoetsen en functies De huidige tijd weergeven Gebruik van de functie PIP U kunt de huidige tijd in beeld brengen. U kunt twee beelden bekijken (hoofdbeeld en subbeeld). Er kunnen twee verschillende televisieprogramma’s, of een Druk op de toets h h (Informatie) om de huidige tijd televisieprogramma en een videoprogramma van een extern weer te geven...
U kunt multibeelden weergeven waarmee u in staat bent • Zelfs als uw apparaat door JVC is gemaakt, kan het gemakkelijk een programma op te zoeken dat u wilt zien. gebeuren dat sommige toetsen niet werken of zelfs geen van de toetsen werkt.
Teletekst-functie Gebruik van de Lijstfunctie U kunt de nummers van uw favoriete Teletekst-pagina’s in MENU het geheugen opslaan en deze later snel weer oproepen met behulp van de kleurtoetsen. Opslaan van paginanummers: 1 Druk op de toets B B om de Lijstfunctie in te schakelen De opgeslagen paginanummers worden onderin het scherm weergegeven.
Teletekst-functie Subpagina Annuleren Sommige Teletekst-pagina's bevatten subpagina’s die U kunt zoeken naar een Teletekst-pagina terwijl u TV kijkt. automatisch in beeld worden gebracht. 1 Druk op de nummertoets om een U kunt iedere gewenste subpagina, op ieder gewenst paginanummer in te voeren of druk op een van moment in beeld houden of weer in beeld brengen.
Het menu van de TV gebruiken Deze TV beschikt over een aantal functies die via menu’s 5 Druk op de toets a a om de instelling te bediend kunnen worden. Om ten volle gebruik te kunnen voltooien maken van alle functies van uw TV, dient u de Het menu verdwijnt.
BEELD INSTELLING Zie “Het menu van de TV gebruiken” (zie pagina 23) voor TINT meer gegevens over de menuweergave. U kunt een van de drie instellingsstanden TINT kiezen (drie BEELD INSTELLING verschillende wittonen) om de witbalans van het beeld af te stellen.
BEELD MOGELIJKHEDEN Zie “Het menu van de TV gebruiken” (zie pagina 23) voor Super DigiPure meer gegevens over de menuweergave. De Super DigiPure-functie maakt gebruik van de meest BEELD MOGELIJKHEDEN recente digitale technologie om een natuurlijk beeld te AUTO verkrijgen. De Super DigiPure-functie bevat de volgende Super DigiPure AUTO KLEURSYSTEEM...
BEELD MOGELIJKHEDEN KLEURSYSTEEM 4:3 AUTO ZOOM Het kleursysteem wordt automatisch gekozen. Als het beeld U kunt een van de drie ZOOM-instellingen kiezen: echter niet helder is of er is geen kleur, stel het kleursysteem NORMAAL, PANORAMIC of 14:9 ZOOM als ZOOM- dan handmatig in.
BEELD MOGELIJKHEDEN PIP POSITIE: U kunt een van de vier posities voor het subbeeld kiezen. 1 Gebruik de 6 6 -toetsen om PIP te kiezen. Druk hierna op de toets a Het menu PIP verschijnt. PIP POSITIE MULTI-BEELD TERUG D0061-NL 2 Gebruik de 6 6 -toetsen om PIP POSITIE te kiezen.
GELUID INSTELLING Zie “Het menu van de TV gebruiken” (zie pagina 23) voor LUIDSPREKER meer gegevens over de menuweergave. U kunt de geluidsweergave van de TV-luidsprekers GELUID INSTELLING uitschakelen, maar dit heeft natuurlijk alleen maar zin als er STEREO/ een geluidsinstallatie op de TV is aangesloten, via welke u LAGE TONEN HOGE TONEN het geluid kunt beluisteren.
Seite 169
GELUID INSTELLING HOOFDTELEFOON U moet het menu HOOFDTELEFOON gebruiken om het volume van de hoofdtelefoon aan te passen. Het menu HOOFDTELEFOON kan eveneens worden gebruikt om in te stellen of er geluid wordt weergegeven via de luidsprekers van de TV wanneer de hoofdtelefoon wordt gebruikt en om de instellingen uit te voeren voor het geluid dat wordt weergegeven via de hoofdtelefoon.
EXT. INSTELLING Zie “Het menu van de TV gebruiken” (zie pagina 23) voor ID LIJST meer gegevens over de menuweergave. U kunt iedere EXT-aansluiting een naam geven, die EXT. INSTELLING overeenkomt is met het apparaat dat er op is aangesloten. EXT-1 Als u een EXT-aansluiting een naam geeft, verschijnt het COPIEREN...
Seite 171
EXT. INSTELLING 2 Gebruik de 6 6 -toetsen om een EXT-aansluiting of TV te kiezen. Druk hierna op de toets a De pijl in het menu stelt een signaalstroom voor. De linkerkant van de pijl vertegenwoordigt een signaal dat wordt uitgestuurd door de EXT-2-aansluiting. EXT-1/EXT-3/EXT-5: Het uitgangssignaal van een apparaat dat is aangesloten op de EXT-aansluiting, gaat door de TV en wordt...
MOGELIJKHEDEN Zie “Het menu van de TV gebruiken” (zie pagina 23) voor Inschakelen van de functie KINDERSLOT meer gegevens over de menuweergave. 1 Kies KINDERSLOT en druk hierna op de toets MOGELIJKHEDEN “STEL ID NR. IN” (ID instelscherm voor het nummer) SLEEP TIMER BLAUW BEELD verschijnt.
MOGELIJKHEDEN 3 Gebruik de nummertoetsen om het ID-nummer in te voeren Het slot wordt tijdelijk opgeheven en u kunt het programma bekijken. Als u het ID-nummer bent vergeten: Voer stap 1 uit van “Inschakelen van de functie KINDERSLOT”. Nadat u het ID-nummer heeft bevestigd, drukt u op de toets b om het menu te verlaten.
INSTELLEN Zie “Het menu van de TV gebruiken” (zie pagina 23) voor • U kunt nu de programmanummers (PR) gaan meer gegevens over de menuweergave. bewerken met behulp van de functie SORTEREN/ MANUEEL. Voor meer details raadpleegt u “SORTEREN/MANUEEL” op pagina 35. INSTELLEN •...
INSTELLEN 3 Druk op de toets a a om de instellingen te SORTEREN/MANUEEL voltooien De functies SORTEREN/MANUEEL zijn verdeeld in twee Het menu T-V LINK verschijnt. types: bewerken van de programmanummers (PR) (SORTEREN-functies) en handmatig vastleggen van een T-V LINK TV-kanaal onder een programmanummer (PR) OVERDRAGEN TV (MANUEEL-functie).
Seite 176
INSTELLEN INVOEGEN Voorbereidingen: 1 Gebruik de 6 6 -toetsen om een TV-kanaal te • U dient een CH/CC-nummer te vinden dat uniek is voor kiezen deze TV en dat correspondeert met het kanaalnummer Iedere keer dat u een toets 6 indrukt, verandert het van de zender.
Seite 177
INSTELLEN UITWISSEN 5 Blijf op de groene of rode toets drukken tot de gewenste zender wordt weergegeven 1 Gebruik de 6 6 -toetsen om een TV-kanaal te kiezen Bij een slechte ontvangst: Iedere keer dat u een toets 6 indrukt, verandert het Druk op de blauwe of gele toets om de fijnafstelling voor programmanummer (PR) en verschijnt het beeld van de de zender uit te voeren.
Nog meer menu’s Gebruik van de functie ACI Versturen van de gegevens naar een videorecorder Deze TV is voorzien van een ACI-functie voor het decoderen van de ACI-gegevens (automatische U kunt de gegevens van de nieuwste programmanummers kanaalinstelling). (PR) naar een videorecorder versturen, met behulp van de Met behulp van de ACI-functie kunt u de TV-zenders die de functie T-V LINK.
Nog meer menu’s Wijziging van de instelling LAND Gebruik van de functie DECODER (EXT-2) Als de functie AUTOMATISCH is uitgevoerd, kunt u het Bij aansluiten van een decoder met een videorecorder compatibel met T-V LINK op de EXT-2-aansluiting, moet land dat u reeds had ingesteld met de functie u de functie DECODER (EXT-2) gebruiken om de AUTOMATISCH, wijzigen.
Verdere voorbereidingen Aansluiten van externe apparatuur 1 Videorecorder (samengesteld signaal) Sluit de apparatuur op de TV aan zoals in de onderstaande aansluitschema’s is aangegeven. 2 Videorecorder (samengesteld signaal/S-VIDEO- signaal) Voordat u een aansluiting maakt: 3 T-V LINK compatibele videorecorder (samengesteld •...
Seite 181
Verdere voorbereidingen Apparaten die een S-VIDEO-signaal (Y/C- Aansluiten van luidsprekers en/of een signaal) kunnen uitsturen, zoals een S-VHS- versterker videorecorder Zie het aansluitschema voor audio-apparatuur en sluit de gewenste geluidsapparatuur op de TV aan. Sluit het apparaat aan op een EXT-aansluiting, maar niet op U kunt perifere voorluidsprekers aansluiten om naar het de EXT-1-aansluiting.
CH/CC-nummers Als u de functie INVOEGEN op pagina 36 wilt gebruiken, zoek dan het CH/CC-nummer dat correspondeert met het TV-kanaal in deze tabel op. Kanaal Kanaal Kanaal Kanaal CH 02 / CH 202 E2, R1 CH 40 / CH 240 E40, R40 CC 01 / CC 201 CC 31 / CC 231...
Verhelpen van storingen Als er zich een probleem voordoet met de TV, lees dan eerst “Verhelpen van storingen” aandachtig door voordat u uw TV laat repareren. U kunt het probleem wellicht heel makkelijk zelf oplossen. Als de netstekker bijvoorbeeld niet in het stopcontact zit, of er is een probleem met de antenne, dan lijkt het misschien alsof de TV zelf kapot is.
Verhelpen van storingen Overige problemen • Als de functie SLEEP TIMER is ingeschakeld, wordt de TV automatisch uitgeschakeld. Als de TV plotseling wordt uitgeschakeld, druk dan op de toets # (Stand- by) om te proberen de TV weer in te schakelen. Als de TV nu weer gewoon ingeschakeld kan worden, is er geen sprake van een storing.
Specificaties Model PD-42D30ES Item TV RF-systemen CCIR B/G, I, D/K, L Kleursystemen PAL, SECAM • De EXT-aansluitingen ondersteunen ook het NTSC 3.58/4.43 MHz-systeem. Kanalen en frequenties • E2-E12, E21-E69, S1-S41, X, Y, Z, Z+1, Z+2, ITALIË A-H, ITALIË H+1, ITALIË H+2, F2-F10, F21-F69, R1-R12, R21-R69 •...
Seite 187
Gracias por comprar este televisor en color JVC. Lea atentamente este manual antes de empezar a utilizar el televisor para asegurarse de que lo usa correctamente. ADVERTENCIA: NO EXPONGA ESTE APARATO A LA LLUVIA O LA HUMEDAD, YA QUE PODRÍA PROVOCAR UN INCENDIO O SUFRIR UNA DESCARGA ELÉCTRICA.
Seite 188
Pantalla “quemada” Una característica de los paneles de pantalla de plasma (PDP) es que si se visualiza la misma imagen durante mucho tiempo provoca que parte de la imagen quede permanentemente en pantalla (quemadura de fósforo). Evite las quemaduras como sigue. No muestre imágenes estáticas ni caracteres durante mucho tiempo.
Seite 189
Defectos de punto Los PDP utilizan grupos de píxeles finos para visualizar las imágenes. Aunque no hay ningún problema con más del 99,99% de esos píxeles, tenga en cuenta que un pequeño número de píxeles puede que no se enciendan o que se enciendan permanentemente. No instale el televisor cerca de equipos electrónicos que puedan ser susceptibles de ondas electromagnéticas Podría producir interferencias en la imagen, el sonido, etc.
Seite 190
Cómo cambiar la configuración de PAIS ..39 Cómo configurar el IMAGEN MULTIPLE ..20 Cómo configurar el DECODER (EXT-2) ..39 Cómo utilizar un VCR JVC o un reproductor Otros pasos previos ......40 de DVD............20 Cómo conectar equipos externos ....40 Función teletexto........21...
Seite 191
Verificar el contenido de los paquetes El televisor y los componentes se suministran en tres paquetes. Verifique que están todos los componentes. Si faltara alguno de los componentes, póngase inmediatamente en contacto con su distribuidor. Televisor Cable del sistema Control remoto MEN U TV/A V Cable de alimentación...
Configuración del televisor • Utilizar el soporte diseñado para este televisor. Para obtener información acerca de cómo sujetar el soporte, consulte el manual de usuario del soporte. • Asegúrese que el televisor es instalado en la pared por personal especializado. Montaje de los altavoces frontales y preparación del subwoofer Montaje de los altavoces delanteros Monte los altavoces DD que se suministran a la izquierda y a la derecha del televisor.
Configuración del televisor Instalación Precauciones de instalación • No incline el televisor hacia la izquierda ni hacia la derecha, ni hacia adelante o hacia atrás. • Instale el televisor en una esquina en una pared o en el suelo, de forma que los cables no queden en medio. •...
Conexiones Precaución • Antes de realizar cualquier conexión, apague todos los equipos (incluido el televisor). Diagrama de conexiones AC INPUT 110-240V Cable suministrado con el televisor • Consulte página 12 para más información acerca de la conexión. Altavoz delantero Televisor (parte trasera) izquierdo Altavoz delantero...
Conexiones Conexión de los altavoces delanteros y el subwoofer Utilice los cables de altavoz que se suministran para conectar los altavoces a los terminales de altavoz de la parte posterior del televisor. Conexión del cable del altavoz al terminal del altavoz delantero Realice las conexiones utilizando los cables de altavoces delanteros que se suministran (de aproximadamente 1,2 m de longitud).
Conexiones Agrupación de los cables de los altavoces Utilice las abrazaderas de los cables que se suministran para colocar juntos los cables conectados de los altavoces. Abrazadera del cable Cable de altavoces • Quite el papel de la parte posterior de la abrazadera del cable y colóquela en la ubicación que desee. Para asegurarse de que la abrazadera del cable está...
Conexiones Cómo conectar la antena y el vídeo Antena • Los cables de conexión no van incluidos con el televisor. Parte trasera del • Si desea información más detallada, consulte los Cable coaxial de 75 ohmios receptor manuales suministrados con los dispositivos que vaya a conectar.
Conexiones Inserte el enchufe de CA en una toma de corriente puesta a Conexión del cable de alimentación a la tierra correctamente. toma de corriente de CA Inserte las clavijas de AC de los cables de alimentación del televisor y del receptor en los enchufes de AC. Precaución •...
3 Pulse los botones 5 5 y 6 6 para seleccionar el modo de ajuste inicial y aparece el logotipo de JVC. Para CASTELLANO. A continuación, pulse el botón proceder al ajuste inicial, siga las instrucciones de pantalla. Botón amarillo El idioma que aparecerá...
Son vídeos compatibles con T-V LINK los aparatos de “GRABACION NO EFECTUADA”. vídeo JVC que incorporan el logotipo T-V LINK o cualquier aparato de vídeo de otra marca que incorpore • No puede activarse desde el televisor.
Botones y funciones del televisor Cómo encender el televisor cuando Parte delantera de la pantalla está en modo de espera Pulse el botón A A A A o los botones P p p para encender el televisor cuando esté en modo de espera •...
Funciones y botones del mando a distancia 1 Botón silenciador 2 Botones numéricos 3 Botón c 4 Botón de sonido 3 5 Botón de información 6 Botón b 7 Botones 5 8 Botón de modo en espera 9 Botones de color 0 Botón a - Botones 6 = Botón VCR/DVD/control del teletexto...
Funciones y botones del mando a distancia Utilice la LISTA PR: Utilice la LISTA PR: 1 Pulse el botón h h (Información) para ver la 1 Pulse el botón h h (Información) para ver la LISTA PR LISTA PR Pulse el botón h (Información) y la pantalla cambiará 2 Pulse los botones 5 5 y6 6 para seleccionar...
Funciones y botones del mando a distancia Cómo seleccionar el modo de ZOOM Función ZOOM 1 Pulse el botón c c para acceder al menú Este televisor le permite adaptar el formato de la pantalla al ZOOM formato de la imagen. Seleccione el mejor de entre los siguientes modos ZOOM.
Funciones y botones del mando a distancia Cómo visualizar la hora Cómo configurar el PIP Es posible mostrar la hora en la pantalla. Puede visualizar dos imágenes (imagen principal e imagen secundaria). Pulse el botón h h (Información) para ver la hora Se pueden ver dos programas distintos de televisión al Pulse el botón h (Información) y la pantalla cambiará...
DVD de doble imagen o en el modo imagen en imagen. Es posible utilizar un vídeo JVC o un reproductor de DVD. • Una imagen progressive-scanning no se puede Utilice los que tengan correspondencia en el mando a visualizar como imagen secundaria.
Función teletexto Cómo utilizar la lista del teletexto Puede memorizar el número de las páginas de teletexto que MENU más le gusten y recuperarlas cuando quiera utilizando los botones de color. Para memorizar números de página: 1 Pulse el botón B B para acceder a la lista Los números de página memorizados aparecen en la parte inferior de la pantalla.
Función teletexto Página secundaria Salir Algunas páginas de teletexto arrastran páginas secundarias Puede buscar una página de teletexto y, al mismo tiempo, que aparecen en pantalla automáticamente. ver la televisión. Las páginas secundarias se pueden bloquear o visualizar en 1 Introduzca el número de una página de cualquier momento.
Cómo utilizar el menú del televisor Este televisor incorpora varias funciones controlables desde 5 Pulse el botón a a para confirmar la selección menús. Para sacarle el máximo partido al televisor, debe El menú desaparece. llegar a dominar el funcionamiento de los menús. •...
AJUSTE DE IMAGEN Consulte “Cómo utilizar el menú del televisor” (véase TEMP. COLOR página 23) para obtener más información acerca de cómo mostrar el menú. Puede escoger cualquiera de los tres modos de TEMP. COLOR (tres tonos de blanco) para que el televisor ajuste AJUSTE DE IMAGEN automáticamente el balance de blanco de la imagen.
FUNCIONES DE IMAGEN Consulte “Cómo utilizar el menú del televisor” (véase Super DigiPure página 23) para obtener más información acerca de cómo mostrar el menú. La función Super DigiPure emplea lo último en tecnología digital para ofrecerle una imagen de aspecto natural. La función Super DigiPure incluye las dos funciones FUNCIONES DE IMAGEN siguientes.
FUNCIONES DE IMAGEN SISTEMA DE COLOR MODO CINE El televisor selecciona automáticamente un sistema de La función MODO CINE muestra en la pantalla una imagen color, Pero si la imagen no sale nítida o fallan los colores, de película de cine más suave y natural. puede cambiar el sistema de color manualmente.
FUNCIONES DE IMAGEN POSICION DE PIP: Puede elegir una de cuatro posiciones para la imagen secundaria. 1 Pulse los botones 6 6 para seleccionar PIP. A continuación, pulse el botón a Se abre el menú PIP. POSICION DE PIP IMAGEN MULTIPLE ATRAS D0061-SP 2 Pulse los botones 6...
AJUSTE DE SONIDO Consulte “Cómo utilizar el menú del televisor” (véase ALTAVOZ página 23) para obtener más información acerca de cómo mostrar el menú. Es posible apagar el sonido de los altavoces del televisor, aunque sólo debería hacerlo si tiene conectado al televisor AJUSTE DE SONIDO un sistema de audio como sustituto de los altavoces del ESTEREO/...
Seite 215
AJUSTE DE SONIDO AURICULAR Para ajustar el volumen de los auriculares debe emplear el menú AURICULAR. El menú AURICULAR también se puede usar para ajustar si el sonido se emite o no desde los altavoces del televisor cuando se utilizan los auriculares, y para realizar los ajustes del sonido que se emite desde los auriculares.
AJUSTE EXT. Consulte “Cómo utilizar el menú del televisor” (véase LISTA ID página 23) para obtener más información acerca de cómo mostrar el menú. La lista permite dar un nombre a los equipos conectados a cada terminal EXT. Al dar nombre a un terminal EXT el AJUSTE EXT.
Seite 217
AJUSTE EXT. 2 Pulse los botones 6 6 para seleccionar un terminal EXT o el TV. A continuación, pulse el botón a La flecha del menú informa de que se está transmitiendo la señal. A la izquierda de la flecha se indica la fuente de señal de salida del terminal EXT-2.
OTRAS FUNCIONES Consulte “Cómo utilizar el menú del televisor” (véase PROTECCION INFANTIL página 23) para obtener más información acerca de cómo mostrar el menú. Si quiere evitar que sus hijos vean un canal de televisión, puede bloquearlo con la función PROTECCION OTRAS FUNCIONES INFANTIL.
OTRAS FUNCIONES Para ver un canal de televisión bloqueado FONDO NIEVE 1 Seleccione un número de canal (PR) bloqueado Si la distorsión es mínima, las imágenes distorsionadas y utilizando los botones numéricos o la LISTA PR residuales pueden mejorarse con la función La pantalla se vuelve azul y aparece el símbolo n FONDO NIEVE.
INSTALACION Consulte “Cómo utilizar el menú del televisor” (véase • Si desea cambiar el número asignado a los canales página 23) para obtener más información acerca de cómo (PR), utilice la función EDICION/MANUAL. Para mostrar el menú. más información, consulte el apartado “EDICION/ MANUAL”...
INSTALACION 3 Pulse el botón a a para confirmar la selección EDICION/MANUAL Se abre el menú T-V LINK. La función EDICION/MANUAL se divide en dos tipos: edición de los números de canal existentes (PR) (funciones T-V LINK EDICION) y memorización manual de canales en números ACTUALIZAR de canal (PR) (función MANUAL).
Seite 222
INSTALACION INSERTAR Pasos previos: 1 Pulse los botones 6 6 para seleccionar un • Necesita un número CH/CC exclusivo del televisor, canal de televisión correspondiente a un número de canal de televisión. Cada vez que pulse los botones 6, retrocederá o Seleccione el número CH/CC en la tabla “Números CH/ avanzará...
Seite 223
INSTALACION BORRAR 5 Pulse el botón verde o rojo varias veces seguidas hasta que aparezca el canal de 1 Pulse los botones 6 6 para seleccionar un televisión que busca canal de televisión Cada vez que pulse los botones 6, retrocederá o Si el canal no se recibe bien: avanzará...
Otras funciones del menú Cómo configurar el ACI Cómo actualizar la información en el vídeo Este televisor tiene una función ACI que descodifica los datos ACI (Instalación Automática de Canales). La función T-V LINK le permite enviar al aparato de vídeo El empleo de la función ACI permite registrar de forma la información registrada más recientemente en los números apropiada y rápidamente todos los canales transmitidos por...
Otras funciones del menú Cómo cambiar la configuración de PAIS Cómo configurar el DECODER (EXT-2) Una vez realizada la AUTO PROGRAMACION, puede Si tiene un vídeo compatible con T-V LINK conectado al cambiar el país seleccionado utilizando esa misma función terminal EXT-2 y conecta un decodificador, utilizando la de AUTO PROGRAMACION.
Otros pasos previos Cómo conectar equipos externos 1 Vídeo (señal compuesta) Conecte los dispositivos al televisor, prestando atención a los siguientes diagramas de instalación. 2 Vídeo (señal compuesta/señal S-VIDEO) 3 Vídeo compatible con T-V LINK (señal compuesta/ Antes de realizar cualquier conexión: señal S-VIDEO) •...
Seite 227
Otros pasos previos Equipos que pueden enviar la señal de Conexión de los altavoces/amplificador S-VIDEO (señal Y/C) como un vídeo S-VHS Consulte el diagrama de conexión del equipo de audio y, a continuación, conecte al televisor el equipo de audio que Conecte el equipo a un terminal EXT excepto al terminal desee.
Números CH/CC Para utilizar la función INSERTAR descrita en la página página 36, busque el número CH/CC que corresponda al número de canal del televisor de esta tabla. Canal Canal Canal Canal CH 02 / CH 202 E2, R1 CH 40 / CH 240 E40, R40 CC 01 / CC 201 CC 31 / CC 231...
Solución de problemas Si se le presenta algún problema al utilizar el televisor, lea este apartado de “Solución de problemas” antes de llevar a reparar el aparato. Es posible que pueda arreglarlo usted mismo. A veces, por ejemplo, el televisor está desenchufado de la toma de corriente o la antena está...
Seite 230
Solución de problemas Otras cuestiones que se deben tener en cuenta • Si el TEMPORIZADOR está activado, el televisor se apaga automáticamente. Si el televisor deja de funcionar repentinamente, pulse el botón # (modo en espera) para volverlo a encender. Si el televisor se enciende y empieza a funcionar con normalidad, no hay riesgo de avería.
Características técnicas Modelo PD-42D30ES Parámetro de ajuste Sistemas de transmisión CCIR B/G, I, D/K, L Sistemas de color PAL, SECAM • Los terminales EXT también son compatibles con el sistema NTSC 3.58/4.43 MHz. Canales y frecuencias • E2-E12, E21-E69, S1-S41, X, Y, Z, Z+1, Z+2, ITALIA A-H, ITALIA H+1, ITALIA H+2, F2-F10, F21-F69, R1-R12, R21-R69 •...
Seite 233
Si ringrazia la gentile clientela per l’acquisto di un televisore a colori JVC. Per comprendere a fondo le funzionalità del televisore acquistato, si invita a leggere attentamente il presente manuale prima dell’uso. AVVERTENZA: PER EVITARE RISCHI DI INCENDIO O SCOSSA ELETTRICA, NON ESPORRE L’APPARECCHIATURA A LIQUIDI O UMIDITÀ.
Seite 234
Marcatura da invecchiamento Una caratteristica degli schermi al plasma (PDP, Plasma Display Panels) è il cosiddetto effetto “burn-in”, o invecchiamento del fosforo, che si verifica quando la visualizzazione della stessa immagine per un periodo prolungato di tempo provoca una permanenza sullo schermo di una parte dell’immagine.
Seite 235
Pixel difettosi La tecnologia degli schermi PDP fa uso di insiemi di pixel molto piccoli per riprodurre le immagini. Sebbene non si registrino problemi con il 99,99% dei pixel, è necessario essere consapevoli che un numero estremamente basso di pixel potrebbe non illuminarsi o illuminarsi solo saltuariamente.
Seite 236
Uso della funzione MULTI IMMAGINE ....20 Operazioni aggiuntive con i menu ..38 Azionamento di un videoregistratore (VCR) Uso della funzione ACI........38 o di un lettore DVD JVC ........20 Scaricamento dei dati sul videoregistratore ..38 Funzione televideo .......21 Modifica dell’impostazione NAZIONE ..... 39 Uso della funzione DECODER (EXT-2) ..
Controllo del contenuto delle confezioni Il televisore e i componenti vengono forniti in tre confezioni. Controllare che siano inclusi tutti i componenti. Se dovessero mancare dei componenti, contattare immediatamente il rivenditore. Televisore Cavo di sistema Telecomando MEN U TV/A V Televisore Cavo di alimentazione Viti di montaggio ×...
Preparazione del televisore • Utilizzare il piedistallo studiato per questo televisore. Per informazioni dettagliate sul montaggio del piedistallo, fare riferimento al manuale utente del piedistallo. • Assicurarsi che il televisore venga installato alla parete da un installatore qualificato. Montaggio degli altoparlanti anteriori e preparazione del subwoofer Montaggio degli altoparlanti anteriori Montare gli altoparlanti DD in dotazione alla sinistra e alla destra del televisore.
Preparazione del televisore Installazione Precauzioni di installazione • Non inclinare il televisore verso sinistra, verso destra o verso il retro. • Installare il televisore ad angolo a parete o sul piedistallo in modo che i cavi non intralcino. • Afferrare il televisore (e non gli altoparlanti anteriori) quando si esegue lo spostamento o l’installazione dopo il montaggio degli altoparlanti anteriore sul televisore.
Collegamenti Attenzione • Prima di effettuare qualsiasi collegamento, spegnere ogni apparecchiatura incluso il televisore. Schema di collegamento AC INPUT 110-240V Cavo fornito con il televisore • Per informazioni dettagliate sui collegamenti, fare riferimento a pagina 12. Televisore (retro) Altoparlante anteriore sinistro Altoparlante anteriore...
Collegamenti Collegamento degli altoparlanti anteriori e del subwoofer Utilizzare i cavetti per altoparlante in dotazione per collegare gli altoparlanti ai terminali per altoparlante sul retro del televisore. Collegamento del cavetto per altoparlante al terminale per altoparlante anteriore Eseguire il collegamento utilizzando i cavetti per altoparlante anteriore in dotazione (circa 1,2 in lunghezza). 1 Premere la leva caricata a molla del terminale di 2 Introdurre l’interno del cavetto nel terminale e ingresso altoparlante nella direzione della...
Collegamenti Per raggruppare i cavetti per altoparlante Utilizzare i morsetti per cavo in dotazione per raggruppare insieme i cavetti per altoparlante collegati. Morsetto per cavo Cavetti per altoparlante • Rimuovere la carta dal retro del morsetto per cavo e montarlo nella posizione desiderata. Per assicurarsi che il morsetto per cavo sia montato in modo saldo, attendere alcuni minuti prima di inserire i cavi per altoparlante nel morsetto.
Collegamenti Antenna Connessione dell’antenna e del videoregistratore Cavo coassiale a 75 ohm • I cavi di collegamento non sono inclusi. Retro del ricevitore • Per ulteriori informazioni, fare riferimento ai manuali forniti con i dispositivi che si vogliono collegare. EXT- EXT- Se si connette un videoregistratore, seguire EXT-...
Collegamenti Inserire la spina CA in una presa dotata di messa a terra Collegamento del cavo di alimentazione appropriata. alla presa di corrente Inserire le spine CA dei cavi di alimentazione dal televisore e dal ricevitore alle prese di corrente CA. Attenzione •...
ACI e completare la televisore. registrazione di tutti i canali televisivi in un breve • Il logo della JVC non viene visualizzato se il periodo di tempo. Per ulteriori informazioni sulla televisore è già stato acceso una volta. In questo caso, funzione ACI e sul suo uso, fare riferimento alla sezione utilizzare le funzioni “LINGUA”...
Un “videoregistratore compatibile T-V LINK” è un videoregistratori sono tuttavia in grado di registrare un videoregistratore JVC con il logo T-V LINK o un canale utilizzando l’uscita del televisore se il canale può videoregistratore con uno dei simboli che seguono.
Tasti e funzioni del televisore Accendere il televisore dalla modalità di Schermo anteriore riposo Premere il tasto A A A A o i tasti P p p per accendere il televisore quando si trova in modalità di riposo • Controllare che le spine CA dei cavi di alimentazione dal televisore e dal ricevitore siano collegate a prese di corrente CA appropriate.
Tasti e funzioni del telecomando 1 Tasto di silenziamento 2 Tasti numerici 3 Tasto c 4 Tasto suono 3 5 Tasto Informazioni 6 Tasto b 7 Tasti 5 8 Tasto Riposo (Standby) 9 Tasti colorati 0 Tasto a - Tasti 6 = Tasti di comando VCR/DVD/Televideo ~ Interruttore VCR P DVD ! Tasto g (Testo)
Tasti e funzioni del telecomando Utilizzare LISTA PROGR: Utilizzare LISTA PROGR: 1 Premere il tasto h h (Informazioni) per 1 Premere il tasto h h (Informazioni) per visualizzare la LISTA PROGR visualizzare la LISTA PROGR Continuando a premere il tasto h (Informazioni), 2 Premere i tasti 5 5 e 6 6 per scegliere un...
Tasti e funzioni del telecomando Scegliere la modalità ZOOM Funzione ZOOM 1 Premere il tasto c c per visualizzare il menu Consente di modificare le dimensioni dello schermo in base ZOOM all’immagine. Scegliere la modalità ottimale tra le modalità ZOOM che seguono. ZOOM AUTO AUTO:...
Tasti e funzioni del telecomando Visualizzazione dell’ora corrente Uso della funzione PIP È possibile visualizzare l’ora corrente sullo schermo. È possibile visualizzare due immagini (immagine principale e immagine secondaria). Premere il tasto h h (Informazioni) per visualizzare È possibile guardare contemporaneamente due diversi l’ora corrente programmi TV oppure un programma TV e un programma Continuando a premere il tasto h (Informazioni),...
È possibile azionare un videoregistratore o un lettore DVD l’immagine EXT-4 è visualizzata come immagine di marca JVC. La pressione di un tasto con lo stesso aspetto secondaria, la funzione PIP viene annullata. del tasto del telecomando di un dispositivo consente di - Non è...
Funzione televideo Utilizzo della modalità Lista È possibile memorizzare i numeri delle pagine del televideo MENU preferite e richiamarle rapidamente utilizzando i tasti colorati. Per memorizzare i numeri di pagina: 1 Premere il tasto B B per attivare la modalità Lista I numeri di pagina memorizzati verranno visualizzati nella parte inferiore dello schermo.
Funzione televideo Pagina secondaria Annulla Alcune pagine del televideo includono ulteriori pagine che È possibile cercare una pagina del televideo mentre si vengono visualizzate automaticamente. guarda l’immagine del canale TV. È possibile bloccare qualsiasi pagina secondaria o 1 Premere il tasto numerico per immettere un visualizzarla in qualsiasi momento.
Funzionamento dei menu del televisore Questo televisore dispone di una gamma di funzioni 5 Premere il tasto a a per completare attivabile tramite dei menu. Per utilizzare in modo completo l’impostazione tutte le funzioni del televisore, è necessario conoscere Il menu scomparirà dallo schermo. approfonditamente le tecniche di funzionamento generale •...
IMMAGINE Per ulteriori informazioni sulla visualizzazione del menu, TEMP. COLORE fare riferimento a “Funzionamento dei menu del televisore” (vedere pagina 23). È possibile scegliere tra tre modalità di TEMP. COLORE (tre toni di bianco) per regolare il bilanciamento del bianco dell’immagine.
VARIE/IMMAGINE Per ulteriori informazioni sulla visualizzazione del menu, Super DigiPure fare riferimento a “Funzionamento dei menu del televisore” (vedere pagina 23). La funzione Super DigiPure sfrutta la tecnologia digitale più recente in modo da fornire un'immagine estremamente VARIE/IMMAGINE naturale. La funzione Super DigiPure comprende le due funzioni che seguono.
VARIE/IMMAGINE SISTEMA EFFETTO CINEMA La funzione EFFETTO CINEMA consente di visualizzare Il sistema del colore viene scelto automaticamente. le immagini di pellicole cinematografiche in modo più Tuttavia, se l’immagine non è nitida o non appare il colore, uniforme e naturale sullo schermo. scegliere manualmente il sistema del colore.
VARIE/IMMAGINE POSIZIONE PIP: È possibile scegliere una di quattro posizioni per l’immagine secondaria. 1 Premere i tasti 6 6 per scegliere PIP. Quindi premere il tasto a Verrà visualizzato il menu PIP. POSIZIONE PIP MULTI IMMAGINE PRECEDENTE D0061-IT 2 Premere i tasti 6 6 per scegliere POSIZIONE PIP 3 Premere i tasti 5...
SUONO Per ulteriori informazioni sulla visualizzazione del menu, ALTOPARLANTI fare riferimento a “Funzionamento dei menu del televisore” (vedere pagina 23). È possibile disattivare l’audio dagli altoparlanti del televisore; è necessario tuttavia che un sistema audio sia SUONO collegato al televisore come sostituto degli altoparlanti del STEREO/ televisore.
Seite 261
SUONO CUFFIA Per regolare il volume delle cuffie, è necessario utilizzare il menu CUFFIA. Il menu CUFFIA può inoltre essere utilizzato per attivare o disattivare l’audio degli altoparlanti TV durante l’uso delle cuffie e per eseguire le impostazioni relative all’audio delle cuffie.
PRESELEZIONE EXT Per ulteriori informazioni sulla visualizzazione del menu, LISTA ID fare riferimento a “Funzionamento dei menu del televisore” (vedere pagina 23). È possibile assegnare un nome, corrispondente ai dispositivi collegati, per ciascun terminale EXT. Se si assegna un nome PRESELEZIONE EXT a un terminale EXT, il numero del terminale EXT verrà...
Seite 263
PRESELEZIONE EXT 2 Premere i tasti 6 6 per scegliere un terminale EXT oppure TV. Quindi premere il tasto a La freccia nel menu rappresenta un flusso di segnale. Il lato sinistro della freccia indica una origine di segnale in uscita dal terminale EXT-2.
OPZIONI Per ulteriori informazioni sulla visualizzazione del menu, Per impostare la funzione BLOCCO CANALI fare riferimento a “Funzionamento dei menu del televisore” 1 Selezionare BLOCCO CANALI e quindi premere (vedere pagina 23). il tasto o “CODICE NR.” (ID schermata di impostazione del OPZIONI numero ) viene visualizzata.
OPZIONI 3 Premere i tasti numerici per immettere il numero ID Il blocco verrà temporaneamente rimosso in modo che sia possibile vedere il canale TV. Se non si ricorda il numero ID: Eseguire il passaggio 1 di “Per impostare la funzione BLOCCO CANALI”.
INSTALLAZIONE Per ulteriori informazioni sulla visualizzazione del menu, • È possibile proseguire con la modifica dei numeri fare riferimento a “Funzionamento dei menu del televisore” Programma (PR) utilizzando la funzione MODIFICA (vedere pagina 23). PR/MANUALE. Per ulteriori informazioni, vedere “MODIFICA PR/MANUALE” a pagina 35. •...
INSTALLAZIONE 3 Premere il tasto a a per completare MODIFICA PR/MANUALE l’impostazione Le funzioni MODIFICA PR/MANUALE sono di due tipi: Verrà visualizzato il menu T-V LINK. modifica dei numeri Programma correnti (PR) (funzioni MODIFICA PROGR.) e registrazione manuale di un canale T-V LINK TV da assegnare al numero Programma (PR) (funzione CARICA DATI...
Seite 268
INSTALLAZIONE INSER. Preparazione: 1 Premere i tasti 6 6 per scegliere un canale TV • È richiesto un numero CH/CC univoco per questo Ogni volta che si premono i tasti 6 il numero televisore e che corrisponda al numero di canale di un Programma (PR) cambia e l’immagine del canale TV canale TV.
Seite 269
INSTALLAZIONE ELIMINA 5 Premere ripetutamente il tasto verde o rosso fino a visualizzare il canale TV desiderato 1 Premere i tasti 6 6 per scegliere un canale TV Ogni volta che si premono i tasti 6 il numero Se la ricezione del canale TV è scadente: Programma (PR) cambia e l’immagine del canale TV Premere il tasto blu o giallo per sintonizzare con registrato nel numero Programma (PR) appare sullo...
Operazioni aggiuntive con i menu Uso della funzione ACI Scaricamento dei dati sul videoregistratore Questo televisore è dotato della funzione ACI che serve per decodificare i dati ACI (Automatic Channel Installation = È possibile inviare i dati più recenti dei numeri Programma Installazione automatica dei canali).
Operazioni aggiuntive con i menu Modifica dell’impostazione NAZIONE Uso della funzione DECODER (EXT-2) Dopo aver completato la funzione SINTONIA Quando si collega un decoder a un videoregistratore AUTOMATICA, è possibile cambiare la nazione compatibile T-V LINK collegato al terminale EXT-2, precedentemente impostata utilizzando la funzione utilizzare la funzione DECODER (EXT-2) per decodificare SINTONIA AUTOMATICA.
Preparazioni aggiuntive Collegamento di dispositivi esterni 1 Videoregistratore (segnale composito) Collegare i dispositivi al televisore, facendo attenzione ai seguenti schemi di collegamento. 2 Videoregistratore (segnale composito/segnale S-VIDEO) Prima di iniziare i collegamenti: 3 Videoregistratore compatibile T-V LINK (segnale • Leggere i manuali forniti con i dispositivi. A seconda dei composito/segnale S-VIDEO) dispositivi, il metodo di collegamento potrebbe risultare 4 Decoder...
Preparazioni aggiuntive Dispositivi che possono inviare in uscita il Collegamento di altoparlanti/amplificatore segnale S-VIDEO (segnale Y/C), ad esempio Facendo riferimento allo schema di collegamento dei dispositivi audio, collegare i dispositivi audio desiderati al un videoregistratore S-VHS televisore. Collegare il dispositivo a un terminale EXT diverso dal Per ascoltare l’audio del televisore, è...
Tabella dei numeri CH/CC Quando si desidera utilizzare la funzione INSER. a pagina 36, individuare il numero CH/CC corrispondente al numero di canale del canale TV nella tabella che segue. Canale Canale Canale Canale CH 02 / CH 202 E2, R1 CH 40 / CH 240 E40, R40 CC 01 / CC 201...
Risoluzione dei problemi Se si verifica un problema durante l’uso del televisore, leggere attentamente la presente sezione sulla “Risoluzione dei problemi” prima di far riparare il televisore. È possibile che si sia in grado di risolvere agevolmente il problema autonomamente. Ad esempio, se la spina CA è...
Seite 276
Risoluzione dei problemi Altre considerazioni • Quando la funzione TIMER è attiva, il televisore viene automaticamente spento. Se il televisore si spegne improvvisamente, provare a premere il tasto # (Riposo) per riaccenderlo. Se il televisore viene ripristinato allo stato originale, il problema è stato risolto.
Specifiche tecniche Modello PD-42D30ES Elemento Sistemi di trasmissione CCIR B/G, I, D/K, L Sistemi del colore PAL, SECAM • I terminali EXT supportano anche il sistema NTSC 3.58/4.43 MHz. Canali e frequenze • E2-E12, E21-E69, S1-S41, X, Y, Z, Z+1, Z+2, ITALIA A-H, ITALIA H+1, ITALIA H+2, F2-F10, F21-F69, R1-R12, R21-R69 •...
Seite 279
Obrigado por ter adquirido este televisor a cores JVC. Para utilizar correctamente o seu novo televisor, leia atentamente este manual antes de começar. AVISO: PARA EVITAR INCÊNDIOS OU CHOQUES ELÉCTRICOS, NÃO EXPONHA ESTE APARELHO À CHUVA OU À HUMIDADE. AVISO Utilize sempre os cabos de alimentação fornecidos juntamente com o televisor e o receptor.
Seite 280
Queimar Uma característica dos Painéis de Visualização de Plasma (PDP) é que no caso da mesma imagem ser visualizada durante um longo período de tempo, a imagem fica parcialmente gravada no ecrã (queimada em fósforo). Evite a queimadura da seguinte forma. Não veja caracteres ou imagens estáticas durante longos períodos de tempo.
Seite 281
Defeitos de ponto Os PDP usam colecções de pixéis finos para visualizar imagens. Normalmente não há problemas com mais de 99,99% destes pixéis, mas compreenda que pode acontecer que um pequeno número de pixéis pode não iluminar ou ficar sempre iluminado. Não instale o televisor junto a equipamento electrónico susceptível a ondas electromagnéticas Pode provocar interferências em imagens, som, etc.
Seite 282
INSTALL (instalação)......34 (multi-imagem)..........20 LANGUAGE (idioma) ........34 Pôr a funcionar um VCR ou um leitor DVD da AUTO PROGRAM (programação marca JVC ............20 automática) ..........34 Função de teletexto......21 EDIT/MANUAL (Edição/Manual)..... 35 Operações básicas ..........21 Operações adicionais do menu..38 Utilizar o modo de lista........21...
Seite 283
Verificar o conteúdo das embalagens O televisor e os componentes são fornecidos em três pacotes. Verifique se tem todos os componentes. Contacte imediatamente o revendedor se faltar algum componente. Televisor Cabos do sistema Telecomando MEN U TV/A V Televisor Cabo de alimentação Parafuso de montagem ×...
Instalar o televisor • Utilize o suporte concebido para este televisor. Para mais informações sobre como o suporte, consulte o manual do utilizador do suporte. • Certifique-se de que o televisor é instalado na parede por um técnico qualificado. Montar as colunas frontais e preparar o subwoofer Montar as colunas frontais Monte as colunas DD fornecidas no lado direito e esquerdo do televisor.
Instalar o televisor Instalação Precauções com a instalação • Não incline o televisor para a esquerda, direita ou para trás. • Instale o televisor num canto ou no chão para manter os cabos fora do caminho. • Agarre no televisor (não nas colunas frontais) quando o mover ou instalar depois de montar as colunas frontais no televisor. •...
Ligações Cuidado • Desligue todos os aparelhos (incluindo o televisor) antes de fazer qualquer ligação. Diagrama de ligação AC INPUT 110-240V Cabo fornecido com o televisor • Para mais informações sobre as ligações, consulte página 12. Televisor (parte traseira) Coluna frontal esquerda Coluna frontal direita DISPLAY INPUT...
Ligações Ligar as colunas frontais e subwoofer Utilize os cabos das colunas fornecidos para ligar as colunas aos terminais das colunas existentes na parte traseira do televisor. Ligar o cabo da coluna ao terminal da coluna frontal Ligue os cabos das colunas frontais fornecidos (cerca de 1,2 m de comprimento). 1 Prima a alavanca do terminal de entrada da 2 Prima o núcleo do cabo no terminal e bloqueá- coluna com mola na direcção da seta...
Ligações Arrumar os cabos das colunas Utilize os grampos dos cabos fornecidos para manter arrumados os cabos das colunas ligados. Grampo do cabo Cabos das colunas • Retire o papel da parte traseira do grampo do cabo e instale-o no localização pretendida. Para garantir que o grampo do cabo está correctamente instalado, aguarde alguns minutos antes de inserir os cabos das colunas no grampo.
Ligações Ligar a antena e o videogravador Antena • Os cabos de ligação não são fornecidos. Parte traseira do • Para mais informações, consulte os manuais fornecidos Cabo coaxial de 75 ohm receptor com os dispositivos que deseja ligar. Se ligar um videogravador, siga A A A A → B B B B → C C C C . EXT- EXT- Se não ligar um videogravador, siga 1 1 1 1 .
Ligações Introduza a ficha Vca numa tomada correcta com ligação à Ligar o cabo de alimentação à tomada terra. da rede CA Insira as fichas CA dos cabos de alimentação do televisor e do receptor nas tomadas CA. Cuidado • Utilize apenas a fonte de alimentação especificada (110 –...
4 Prima os botões 5 5 e 6 6 para seleccionar o de activação do televisor pisca verde e o logótipo da JVC país em que se encontra agora aparece. • Verifique se as fichas CA dos cabos de alimentação 5 Prima o botão azul para iniciar a função AUTO...
Um “T-V LINK videogravador compatível” significa um ser visto no televisor. No entanto, alguns videogravador da JVC com o logótipo de T-V LINK ou um videogravadores poderão gravar um canal através da videogravador com um dos seguintes logótipos. No entanto, saída do televisor, caso esse canal possa ser visto no...
Botões e funções do televisor Ligar o televisor a partir do modo de Frente do monitor espera Prima o botão A A A A ou os botões P p p para ligar o televisor a partir do modo de espera •...
Botões e funções do telecomando 1 Botão de desactivação do som 2 Botões numéricos 3 Botão c 4 Botão de som 3 5 Botão de informação 6 Botão b 7 Botões 5 8 Botão de espera 9 Botões coloridos 0 Botão a - Botões 6 = Botão de controlo VCR/DVD/Teletexto ~ Interruptor VCR P DVD...
Botões e funções do telecomando Utilize a PR LIST (lista PR): Utilize a PR LIST (lista PR): 1 Prima o botão h h (Informação) para ver PR LIST 1 Prima o botão h h (Informação) para ver PR LIST (lista PR) (lista PR) Se premir o botão h (Informação) a visualização é...
Botões e funções do telecomando Selecção do modo de ZOOM Função ZOOM 1 Prima o botão c c para ver o menu ZOOM É possível alterar o tamanho do ecrã de acordo com o alongamento da imagem. Seleccione o melhor a partir dos ZOOM seguintes modos de ZOOM.
Botões e funções do telecomando Ver a hora actual Utilizar a função PIP Pode ver a hora actual no ecrã. Pode ver duas imagens (Imagem principal e a sub-imagem). Pode ver dois programas de televisão diferentes em Prima o botão h h (Informação) para ver a hora simultâneo ou um programa de televisão e um programa de actual...
Pode pôr a funcionar um videogravador ou um leitor DVD • A função BLUE BACK (fundo azul) não funciona no da marca JVC. Se premir o botão com o mesmo aspecto que modo de duas imagens ou no modo de imagem em o botão original do telecomando de um dispositivo, faz a...
Função de teletexto Utilizar o modo de lista Pode guardar os números das suas páginas favoritas de MENU teletexto na memória e chamá-las rapidamente com os botões coloridos. Para guardar os números das páginas: 1 Prima o botão B B para activar o modo de lista Os números das páginas guardadas aparecem no fundo do ecrã.
Função de teletexto Subpágina Cancelar Algumas páginas do teletexto incluem subpáginas que É possível procurar uma página do teletexto enquanto vê aparecem automaticamente. televisão. Pode reter qualquer subpágina ou vê-la em qualquer altura. 1 Prima o botão numérico para introduzir o 1 Prima o botão D D (Subpágina) para utilizar a número de uma página, ou prima um botão...
Utilizar o menu TV Este televisor possui várias funções que pode utilizar 5 Prima o botão a a para completar a definição através dos menus. Para utilizar completamente todas as O menu desaparece. funções do televisor, tem de compreender bem as técnicas •...
PICTURE SETTING (definição da imagem) Para mais informações sobre a visualização do menu, COLOUR TEMP. (temp. cor) consulte “Utilizar o menu TV” (ver página 23). Pode seleccionar um dos três modos COLOUR TEMP. (temp. cor) (três tons de branco) para ajustar o equilíbrio do PICTURE SETTING branco da imagem.
PICTURE FEATURES (características da imagem) Para mais informações sobre a visualização do menu, Super DigiPure consulte “Utilizar o menu TV” (ver página 23). A função Super DigiPure utiliza a mais recente tecnologia PICTURE FEATURES digital para proporcionar uma imagem de aspecto natural. A função Super DigiPure inclui as seguintes duas funções.
PICTURE FEATURES (características da imagem) COLOUR SYSTEM (sistema de cor) MOVIE THEATRE (cinema) O sistema de cor é escolhido automaticamente. Contudo, A função MOVIE THEATRE (cinema) mostra uma caso a imagem não seja nítida ou a cor não apareça, imagem de um filme mais suave e naturalmente no ecrã. seleccione manualmente o sistema de cor.
PICTURE FEATURES (características da imagem) PIP POSITION (posição PIP): Pode escolher uma de quatro posições para a sub-imagem. 1 Prima os botões 6 6 para seleccionar PIP. Em seguida, prima o botão a Aparece o menu PIP. PIP POSITION MULTI-PICTURE BACK D0061-EN 2 Prima os botões 6...
SOUND SETTING (definição do som) Para mais informações sobre a visualização do menu, SPEAKER (coluna) consulte “Utilizar o menu TV” (ver página 23). Pode desligar o som das colunas do televisor, mas apenas o SOUND SETTING deve fazer se tiver um sistema de áudio ligado ao televisor STEREO/ para substituir das colunas do televisor.
Seite 307
SOUND SETTING (definição do som) HEADPHONE Tem que utilizar o menu HEADPHONE para regular o volume dos auscultadores. Pode também utilizar o menu HEADPHONE para definir se o som é emitido ou não pelas colunas do televisor quando utilizar os auscultadores e efectuar as definições do som emitido pelos auscultadores.
EXT SETTING (configuração EXT) Para mais informações sobre a visualização do menu, ID LIST consulte “Utilizar o menu TV” (ver página 23). Pode ter um nome correspondentes aos dispositivos ligados EXT SETTING a cada terminal EXT. Se atribuir um nome a um terminal EXT-1 EXT, faz com que o número do terminal EXT apareça no DUBBING...
Seite 309
EXT SETTING (configuração EXT) 2 Prima os botões 6 6 para seleccionar um terminal EXT ou TV Em seguida, prima o botão a A seta no menu representa um fluxo de sinal. O lado esquerdo da seta indica uma saída da origem de sinal a partir do terminal EXT-2.
FEATURES (características) Para mais informações sobre a visualização do menu, CHILD LOCK (interdição de acesso a consulte “Utilizar o menu TV” (ver página 23). programas) FEATURES Quando pretende que os seus filhos não vejam um canal de SLEEP TIMER TV, pode utilizar a função CHILD LOCK (interdição de BLUE BACK CHILD LOCK acesso a programas) para bloquear esse canal de TV.
FEATURES (características) 5 Prima o botão azul e active a função CHILD DECODER (descodificador) (EXT-2) LOCK (interdição de acesso a programas). Em seguida, prima o botão a Só pode utilizar esta função quando estiver a ligar um descodificador com um videogravador compatível com T-V n (CHILD LOCK (interdição de acesso a programas)) LINK ligado ao terminal EXT-2.
INSTALL (instalação) Para mais informações sobre a visualização do menu, • Pode proceder à edição dos números de programa consulte “Utilizar o menu TV” (ver página 23). (PR) com a função EDIT/MANUAL (Edição/ Manual). Para mais informações, consulte “EDIT/ MANUAL (Edição/Manual)” na página 35. INSTALL •...
INSTALL (instalação) DELETE (apagar): EDIT/MANUAL (Edição/Manual) Esta função elimina um canal de TV desnecessário. MANUAL: As funções EDIT/MANUAL (Edição/Manual) estão Esta função regista manualmente um novo canal de TV divididas em dois tipos: edição dos números de programa num número de programa (PR). actuais (PR) (funções EDIT (edição)) e registo manual de um canal de TV que deseja ver no número de programa 3 Prima o botão a...
Seite 314
INSTALL (instalação) INSERT (inserir) Preparação: 1 Prima os botões 6 6 para seleccionar um canal • É necessário um número CH/CC único deste televisor e de TV que corresponda ao número do canal de um canal de TV. Sempre que premir os botões 6, o número do Descubra o número CH/CC correspondente a partir da programa (PR) é...
Seite 315
INSTALL (instalação) DELETE (apagar) 5 Prima repetidamente o botão verde ou vermelho até que apareça o canal de TV que 1 Prima os botões 6 6 para seleccionar um canal deseja de TV Sempre que premir os botões 6, o número do Se a recepção do canal de TV for fraca: programa (PR) é...
Operações adicionais do menu Utilizar a função ACI Transferir dados para o videogravador Este televisor possui uma função ACI para a descodificação Pode transmitir os dados dos números de programa (PR) dos dados ACI (Instalação Automática de Canais). mais recentes para o videogravador com a função T-V A utilização da função ACI possibilita o registo adequado e LINK.
Operações adicionais do menu Alterar a definição COUNTRY (país) Utilizar a função DECODER (descodificador) (EXT-2) Depois da função AUTO PROGRAM (programação automática) ser concluída, pode mudar o país que já definiu Quando estiver a ligar um descodificador com um utilizando a função AUTO PROGRAM (programação videogravador compatível com T-V LINK ligado ao terminal automática).
Preparação adicional Ligação de aparelhos externos 1 VCR (sinal composto) Ligue os dispositivos ao televisor, prestando atenção aos seguintes diagramas de ligação. 2 VCR (sinal composto/sinal S-VIDEO) 3 VCR compatível com T-V LINK (sinal composto/sinal Antes de ligar qualquer aparelho: S-VIDEO) •...
Preparação adicional Aparelhos que podem produzir o sinal Ligação de colunas/amplificador S-VIDEO (sinal Y/C) tal como de um Consulte o diagrama de ligação do equipamento de áudio e, em seguida, ligue o equipamento de áudio pretendido ao videogravador S-VHS televisor. Ligue o aparelho a um terminal EXT excepto ao terminal Pode utilizar colunas externas na frente para ouvir o som do EXT-1.
Números de CH/CC Quando utilizar a função INSERT (inserir) na página 36, procure o número CH/CC correspondente ao número do canal de TV desta tabela. Canal Canal Canal Canal CH 02 / CH 202 E2, R1 CH 40 / CH 240 E40, R40 CC 01 / CC 201 CC 31 / CC 231...
Resolução de problemas Se surgir um problema enquanto estiver a utilizar o televisor, leia com atenção esta secção de “Resolução de problemas” antes de solicitar a reparação do televisor. Poderá conseguir resolver o problema facilmente por si próprio. Por exemplo, se a ficha CA estiver desligada da tomada CA, ou se a antena apresentar problemas, poderá...
Seite 322
Resolução de problemas Outros problemas • Quando a função SLEEP TIMER (temporizador “sleep”) funcionar, o televisor é desligado automaticamente. Se o televisor se desligar repentinamente, tente premir o botão # (em espera) para voltar a ligar o televisor. Nesta altura, se o televisor retomar um estado normal, não existe nenhum problema.