Using The Multi-Picture Function; Operating A Jvc Brand Vcr Or Dvd Player - JVC PD-42D30ES Bedienungsanleitung

Remote control buttons and functions
Cancelling the PIP function:
Press the P P button or b button.
P P
• If the main-picture signal is poor, the quality of the
sub-picture may also be poor.
• If the pictures have different standards, the top and
bottom of one of them may be missing.
• If an external device is operated, the sub-picture may
disappear. If this happens, press the P
to redisplay the sub-picture.
• You cannot view a scrambled channel in the sub-
picture. If the Y (swap) button is pressed when
viewing a scrambled channel in the main-picture
using an external decoder, the channel you have been
viewing in the sub-picture will appear in both the
main-picture and sub-picture.
• The ZOOM function does not work in the twin-
picture mode.
• Do not press the Y (swap) button while you are
recording the TV output on the VCR. If you do, the
TV output signal will change.
• The BLUE BACK function does not work in the twin
picture mode or the picture-in-picture mode.
• A progressive-scanning picture cannot be displayed
as the sub-picture.
Also:
- When the EXT-4 picture is a progressive-scanning
picture, you cannot choose EXT-4 with the
U p buttons.
- When the EXT-4 picture signal is changed to a
progressive-scanning picture while the EXT-4
picture is displayed as the sub-picture, the PIP
function is cancelled.
- The pictures cannot be swapped when a
progressive-scanning picture from EXT-4 is being
displayed as the main picture.
• The sub-picture cannot be output from the TV.

Using the MULTI-PICTURE function

You can display multi-pictures so you can find a program
you want to view.
1 Press the X X button to display multi-pictures X X
The channels are displayed in the channel number order.
The multi-pictures will appear in one of the two multi-
picture modes.
12-pictures multi:
D0058-EN
4-pictures multi:
Main picture
D0059-EN
• To display the next multi-pictures, press the X
button.
2 Press the U U p U U
screen you want to see
The chosen picture changes to a moving picture.
20
P button again
P P
Still pictures
Moving picture
Still pictures
Moving picture
p buttons to choose the p p
3 Press the a a button
a a
The multi-pictures disappear and the chosen picture
appears.
Changing the multi-picture mode:
See "MULTI-PICTURE:" on page 27.
Cancelling the multi-pictures:
Press the b button, the 6 buttons, the number
buttons or the a button.
• Pictures from external devices cannot be displayed in
the 12-pictures multi mode.
• In the 4-pictures multi mode, the picture from
external devices can only be displayed as the main
picture.
Operating a JVC brand VCR or DVD
player
These buttons will operate a JVC brand VCR or DVD
player. Pressing a button that looks the same as the device's
original remote control button has the same effect as the
original remote control.
1 Set the VCR P DVD switch to the VCR or DVD
position
VCR:
When you are using a VCR, set the switch to the VCR
position.
DVD:
When you are using a DVD player, set the switch to the
DVD position.
P (Text):
When you are viewing Teletext programmes, set the
switch to the P (Text) position.
2 Press the VCR/DVD control button to control
your VCR or DVD player
• If your device is not made by JVC, these buttons will
not work.
• Even if your device is made by JVC, some of these
buttons may not work, depending on the device you
are using.
• You can use the p buttons to choose a TV channel
the VCR will receive, or choose the chapter the DVD
player plays back.
• Some models of DVD player use the p buttons for
both operating the fast forward/backward functions
and for choosing the chapter. In this case, the
253 buttons do not work.