Adjusting The Receiver Volume; Redial Facility - AUDIOLINE DECT8048 Bedienungsanleitung

4.10

Adjusting the receiver volume

If the receiver volume is too quiet or too loud for you, you can change this to suit your
requirements.
You can adjust the volume during a call by means of the
volume will be shown in the display with the message EAR VOL 1 to 5.
4.11

Redial facility

You can use the redial facility if the person called is engaged or does not reply. Your
telephone remembers the last five numbers dialled.
1. Press the
2. Further redial numbers can now be selected using the
used to page back through the list.
3. Now press the call button
automatically dialled.
Note: If the redial number is stored in the phone book, the name will automatically appear in
the display instead of the phone number.
Deleting redial numbers
To delete an individual number from the redial list, proceed as follows:
1. Press the button and select the redial number that is to be deleted by means of the
and buttons.
2. Press the
3. Confirm with the menu button
redial list.
Deleting all redial numbers
To delete all numbers from the redial list, proceed as follows:
1. Press the button.
2. Hold the
3. Confirm with the menu button
redial list.
button and the last phone number dialled will be shown in the display.
and the telephone number displayed will be
button and the display will show DELETE?.
button pressed until DELETE ALL? appears in the display.
- Operation -
and the telephone number will be deleted from the
and the telephone number will be deleted from the
and buttons. The selected
button. The button is
47