Switching On The Appliance; Fittings - Bosch GSP Serie Gebrauchsanleitung

Switching on
the appliance
Fig. 2
Press main switch 7,
warning signal sounds, AL" display 1
flashes. alarm" display 2 illuminates.
Press warning signal button 6, warning
signal stops.
Display 1 stops flashing.
The appliance left the factory with
the following standard setting:
Freezer compartment temperature:
-18 °C
The set value can be changed, see
description for button 4.
We recommend a setting of -18 °C.
Operating tips
S When the freezer compartment has
reached its operating temperature,
the alarm" display 2 and AL" display 1
go out.
S The sides of the housing are sometimes
heated slightly. This prevents
condensation in the area of the door
seal.
S If you cannot open the freezer
compartment door immediately after
closing it, wait 2 3 minutes until the
partial vacuum has equalised.
S The refrigeration system may cause
several areas of the freezer shelves
to frost quickly. This does not affect
function or power consumption.
The appliance does not require
defrosting until the entire surface of the
freezer shelf is covered with more than
5 mm of frost or ice.

Fittings

not on all models
Large freezer drawer
Fig. 1/12
For freezing and storing large food items,
e.g. turkey, duck and goose.
Freezer calendar
Fig. 6/A
The figures next to the symbols indicate
the permitted storage period in months of
the produce. If frozen produce is
purchased, comply with the
manufacturer's date or sell by date.
Ice block
Fig. 6/B
If a power failure or malfunction occurs,
the ice blocks can be used to slow down
the thawing process. The longest storage
time is obtained by placing the ice block
directly on the food in the top
compartment.
To save space, the ice block can be
stored in the door compartment.
The ice blocks can also be used to cool
food temporarily, e.g. in a cold bag.
en
23