teutonia Mistral S Bedienungsanleitung Seite 11

Folding the Chassis
the right-hand side of the stroller has been pushed. You
can reduce the storage size further by folding down the
top of the handle.
Assembling and removing the wheels
Removing the swivel wheel
Pivot the folding handle to the
side with the locking rods.
Now pull the two unlocking
rods on both sides 1 up -
wards and press the slide for-
wards. The chassis is folded
up to the arrester 2, which
prevents inadvertent folding.
The chassis does not fully
fold unless the foot step 3 on
Before assembling or remo-
ving the wheels, press the
locking spring 1. When as-
sembling the wheels, make
sure that the locking spring
engages properly.
Assembling the wheels
Swivel wheel
Swivel wheel unlocked
We recommend that you do not lock the wheels while
moving as this will give a more comfortable ride.
Seat cover
The seat cover can be completely removed from the seat
unit in order to be washed. To do this, press the press
studs on the seat unit.
The middle seat or reclining surface is designed as a
two-way seat. Release the side zips, pull the cover over
at the head end and the belt on the other side and
re- attach the centre piece on the sides.
Attention: When fitting the seat cover, please pull the
end of the 5-point harness back through the matching
openings without twisting it.
MISTRAL S
Swivel wheel locked
INT
11