Pulse Function; Timer Function - WMF KUCHENMINIS Gebrauchsanweisung

F
G
20

Pulse function

To use the pulse function, select PULSE on the speed controller (10).
The motor operates at maximum speed while the speed controller (10) is set to
the pulse function. The maximum runtime must not exceed one minute.
Planetary mixing system
The planetary mixing system ensures that the ingredients are mixed thoroughly
and evenly. This prevents ingredients/dough from sticking to the edge.
Soft-start
The soft-start function always starts the appliance at a low speed, irrespective of
the selected speed. The speed gradually increases until it has reached the required
setting. This prevents ingredients spraying out.
Electronic speed regulator
The appliance is equipped with an electronic speed regulator that serves to keep
the speed constant under different loads.

Timer function

The timer function can be used with or without the appliance's other functions
to, e.g. set the exact time for the dough to rise. If you activate the timer function,
you can continue using the other functions on the appliance.
Note: The timer function can only be activated when the speed controller (10) is
in the Off position (0).
▪ Press the Start/Pause button or the Plus/Minus buttons to turn on the display.
(Fig. F). The LCD lights up white and shows the preset time "00."
▪ Press the Plus/Minus buttons to set the desired time. The time can be set in
one-minute increments up to 99 minutes.
Note: The time can also be changed when the timer is activated, by pressing the
Plus/Minus buttons.
▪ Press the Start/Pause button to activate the timer function. The
appears on the LCD and the remaining time is shown.
▪ Once the time has elapsed, the appliance beeps and the timer function
switches off.
Note: Hold the Start/Pause button pressed down for at least three seconds to
reset the timer. "00" appears on the display.
Note: The LCD switches off automatically after one hour if you do not press the
Start/Pause button, Plus/Minus buttons or the speed controller. This resets the
timer.
Pausing the timer function
The timer function can be "paused" at any time.
▪ Press the Start/Pause button to "pause" the time. The
▪ To reactivate the timer function, press the Start/Pause button. The
stops flashing.
Timer function and automatic switch-off
When using the timer function together with the automatic switch-off, the
appliance stops automatically when the preset time has elapsed.
▪ Set the desired time as described in the "Timer function" section.
▪ Start the timer function by selecting a speed setting on the speed controller.
(Fig. G) The LED ring lights up white. The
the remaining time is shown.
icon starts to flash.
icon appears on the display and
icon
icon