Getting Started - WMF KUCHENMINIS Gebrauchsanweisung

A
2
1
B
C
D
18
Purpose
The appliance includes accessories (flat beater, dough hook and whisk) that may
be used only for whisking, mixing, kneading and beating food.
The appliance is equipped with a mixer attachment that is suitable for preparing
smoothies and shakes.
Optional accessories enable the appliance to be used for a variety of different
applications: cutting and grating, meat mincing, rolling out home-made dough or
cutting spaghetti and tagliatelle.

Getting started

▪ Remove all packaging from the appliance.
▪ Clean the device before use as described in the chapter on "Cleaning and
care."
▪ Press the release button (7) to tilt the mixer arm upwards (Fig. A).
▪ Push the required mixer accessory (flat beater, kneading hook or whisk) into
the attachment as far as it will go and rotate it anticlockwise until it locks
into place (Fig. B).
▪ Place the mixing bowl (8) on the base. Ensure that the handle is on the side of
the appliance. Turn the mixing bowl (8) in a clockwise direction (Fig. C).
Note: Do not use force when turning the mixing bowl (8).
▪ Press the mixer arm downwards until you hear it lock into place.
▪ Set the speed controller (10) to the Off position (0).
▪ Now insert the mains plug into the socket.
Note: The appliance has a built-in automatic cable winder (15). Any
unrequired length of cable can be stowed away in the appliance. Pulling on
the power cable automatically causes it to wind back into the appliance (Fig.
D).
▪ The LCD (3) lights up white and shows the preset time "00". The appliance can
be used with or without the timer function. Follow the steps in the "Timer
function" section to change the preset time.
Note: If the time-setting button is not pressed within one minute, the LCD (3)
automatically switches itself off.
▪ Select the desired speed. The appliance starts.
▪ The LED ring on the speed controller (10) lights up white.
Note: The appliance is equipped with a safety function. It will start only if the
mixer arm is lowered into position correctly and the covers for accessories (4)
and the mixer attachment (1) are in place.
Note: The food processor requires a start-up phase during which all of the
mechanical components are synchronised. Short, loud operating noises may be
produced, particularly when preparing heavy dough.
▪ When the mix function has finished, set the speed controller (10) to the Off
position (0).
▪ Pull the mains plug out of the socket before emptying the mixing bowl (8).