Safety Function; Setting Up And Connecting - WMF Kult X Gebrauchsanweisung

Danger for children / due to incorrect operation!
Children are often unable to recognise danger or they underestimate it.
Improper handling of the appliance may lead to injury.
▪ Do not allow children to play with the packaging film. They could become caught in the film
while playing and suffocate.
▪ The blades are very sharp. Keep the discs and the stainless steel blade out of the reach of
children.
▪ Do not remove the lid during operation.
▪ Do not reach into the appliance when it is in operation.
▪ Also keep long hair, for example, away from the insertion opening.
▪ Do not insert objects such as spoons, for example, into the insertion opening when the
appliance is in operation.
▪ Do not move the appliance during operation.
▪ The blades will continue to rotate after the appliance has been switched off. Wait until they
stop moving before handling the appliance.
▪ Never touch the blades of the cutting inserts.
Risk of damage!
Improper handling of the appliance may lead to damage.
▪ There is a risk of scalding when processing hot food. In extreme cases, the container could
become damaged. Only food with a maximum temperature of 60°C may be processed.
▪ Do not fill with any hard foods such as coffee beans, candied sugar, bones, nut shells, etc., or
any frozen food.
▪ Do not place the appliance on surfaces that are sensitive to water. Splashed water may damage
such surfaces.

Safety function

The food processor has a built-in safety function. The appliance only works if it is completely and
correctly assembled.

Setting up and connecting

▪ Remove all packaging from the appliance.
▪ Clean the appliance (see chapter „Cleaning and care").
▪ Set up the appliance on a stable and level surface near to a plug socket.
▪ Ensure that the operating switch (6) is set to O (off).
▪ Insert the mains plug into an earthed wall socket that has been installed pursuant to
regulations.
▪ If the power cord is too long, you can roll it up inside the base of the motor (5).
14
Tools
You can use the food processor to cut, grate and chop food and also to knead dough.
Attention! The blades are very sharp!
Accessory Use
Stainless steel blade (7) To chop meat, bread and
vegetables.
Strip cutting disc To prepare strips of vege-
(julienne and French tables
fries) (8)
Fine cutting / Both discs have a
grating disc (9) blade on one side (e.g. for
and coarse cutting / cucumber slices)
grating disc (10) and a grater on the other
(e.g. for potato fritters).
The required tool must be
pointing upwards when
inserted.
Grating disc (11) For very fine grating e.g. of
carrots and potatoes
Emulsifying disc (12) For whipping cream,
whisking egg whites and
making butter cream and
mayonnaise. The processing
time depends on the type,
temperature and quantity
of ingredients and may
vary accordingly. Please
check regularly whether
the desired consistency has
been achieved.
Kneading blade (13) For mixing dough (e.g. yeast
dough)
Speed setting Recommended
operating time
1-2 15 seconds
1 15 seconds
1 for soft ingre- 20 seconds
dients
(e.g. tomatoes,
cucumbers) 15 seconds
2 for harder
ingredients (e.g.
carrots, potatoes)
1-2 20 seconds
Pulse As required
1-2 30 seconds
15