Charging The Battery; About Battery And Charger Displays - Shimano Serie E6000 Gebrauchsanweisung

Charging the battery while installed onto the bicycle
< EC-E6000 >
1.
Insert the battery charger power plug into the outlet.
2.
Insert the charging plug into the battery mount charger connector.
* Place the battery charger main body on a steady surface such as the floor before charging.
<BT-E6000>
Charging plug
„ About battery and charger displays
After charging has started, the LED lamp on the charger
lights up.
You can check the current charging status on the battery
level lamp located on the battery.
Charging (Within 1 hour after the
completion of charging)
Lights up
Charging error
Flashing
Battery disconnected
(1 hour or more after the completion of
Turned
off
charging)
Battery mount
Charger connector
Battery mount Battery mount
Charging plug
Charger LED lamp
Battery level lamp indication
Power button
11
<BT-E6010>
Charger connector