Changing The Batteries; Technical Data - Seca 804 Bedienungsanleitung

8. Servicing

Changing the batteries

When or
bAtt
quire 4 AAA-type 1.5 V batteries.
– Carefully turn over the scale so that the
base of the scale is accessible (see
Fig. 3).
– Push the battery compartment closure
towards "Battery" and open the cover.
– Remove exhausted batteries and insert
new batteries in the battery compart-
ment.

9. Technical data

Dimensions
width:
height:
depth:
Height of figures
Weight
Temperature range
Maximum load
Minimum load
Graduations
0 up to 150 kg
up to 330.6 lb
Measurement ranges
Body fat
Body water
Height
Power supply
Batteries
Weighing precision
Model 804
appear in the display, you should change the batteries. You re-
315 mm
44 mm
300 mm
20 mm
approx. 1.3 kg
+10 °C to +40 °C
150 kg / 330.6 lb / 23:8 st
2 kg / 4.4 lb
100 g
0.2 lb
4.0 to 80.0 % in 0.1 % increments
4.0 to 80.0 % in 0.1 % increments
100 to 220 cm in 1 cm increments
39.5 inches to 86.5 inches in 0.5 inch increments
Battery
4 type AAA 1.5 V batteries
greater than ±0,6 %
Check that the polarity is correct.
– Close the cover.
– Then turn the scale back up the right
way.
GB
17