Cameo STORM FX Bedienungsanleitung Seite 28

System
LEdS = disattivazione display
tESt = programma test per tutte le funzioni del faro a effetti
(LED derby, LED stroboscopio, laser R+G, motori)
rESt = ripristino delle impostazioni di fabbrica
IR REMOTE CONTROL / IR FERNBEDIENUNG / TÉLÉCOMMANDE INFRAROUGE / MANDO A
DISTANCIA POR INFRARROJOS / PILOT NA PODCZERWIEŃ / TELECOMANDO A INFRAROSSI
EN
28
Point the infrared remote control directly at the infrared sensor installed on the front of the spotlight. The
maximum range is about 8 metres. In the DMX and slave modes, the functions on the remote control are
disabled.
Blackout
Auto Program
Music control
Pause
Colour selection
Derby Effect
Laser Effect
Strobe Effect
Numeric
buttons
Auto/Sound
on = disattivazione del display dopo circa 30 secondi di
inattività
oFF = disattivazione del display disabilitata
Arrestare = premere MODE, UP o DOWN
programma
test
Avviare = premere ENTER
ripristino
The ON/OFF button is used to switch off the Derby, laser and strobe effect, regardless
of the mode selected on the remote control. Pressing the ON/OFF button once more
activates the previously selected mode again.
Combination of Derby, laser and strobe effect (Aut0). Resetting the laser setting.
Music-driven program Combination of Derby, laser and strobe effect (Sou0). Reset-
ting the laser setting. Adjusting the microphone sensitivity on the device (MIN - MAX).
Interrupts the sequence of the Derby, laser and strobe effects programs ("freezing"
the last scene). Press one more time to continue the program.
Colour selection for Derby (A) or laser effect (B). Resetting the colour by pressing 2x
on A (Derby effect), or B (laser effect).
Activates the Derby effect program. Press again to switch off.
Activates the laser effect program. Press again to switch off.
Activates the strobe effect program. Press again to switch off.
Adjusting the running speed for the Auto, Derby effect (A), laser effect (B), and strobe
effect programs. 0 = slowest, 9 = fastest speed.
Activating/deactivating the Music control mode for the Derby effect (A), laser effect
(B), and strobe effect programs.
No function