Yamaha TT-R125 Handbuch Seite 166

Fasten the clutch cable with the
paint in the cable guide bottom
recess.
Pass the throttle cable and
starter cable through the cable
guide.
Fasten the starter motor lead.
Pass the engine oil breather
Pass the overflow hose
hose and overflow
between the right half of the
between the right half of the
swingarm and frame.
swingarm and frame.
Pass the negative battery lead
on the inside of the frame as
shown.
Fasten the engine oil breather
Fasten the overflow hose and
hose, overflow hose and air
air vent hoses to 2 clicks.
vent hoses to 2 clicks.
K After fastening the starter
After fastening the starter cable,
cable, push it against the
push it against the starter
starter plunger.
hose plunger.
L Put the tip of the air vent hose
Put the tip of the air vent hose
into the frame.
into the frame.
2 - 34
SPEC
Install the primary coil terminal
(orange) to the ignition coil.
Fasten the ground lead together
with the ignition coil.