Assembly And Installation - Yamaha TT-R125 Handbuch

CLUTCH AND PRIMARY DRIVEN GEAR
Push rod
1. Inspect:
Push rod 1 1
G
Ball 2
G
Wear/damage/bend → Replace.
Primary drive gear
1. Inspect:
Primary drive gear
G
Wear/damage → Replace.
EC495000

ASSEMBLY AND INSTALLATION

Push lever
1. Install:
Push lever 1
G
NOTE:
Apply the lithium soap base grease on the oil
G
seal lip.
Apply the engine oil on the push lever.
G
Primary drive gear
1. Install:
Straight key
G
Primary drive gear 1
G
Washer 2
G
Nut (primary drive gear) 3
G
Primary driven gear 4
G
NOTE:
Install the primary drive gear with the stamp
G
a facing out.
Place a folded rag or aluminum plate 5
G
between the teeth of the primary drive gear
and primary driven gear.
4 - 45
ENG
70 Nm (7.0 m · kg, 50 ft · lb)