Lcd Displays - Conrad Electronic WS555 Bedienungsanleitung

8. LCD Displays

1 Current indoor temperature
2 Current indoor humidity
3 Comfort zone indicator (for the display of a comfortable/uncomfortable climate)
4 Rain display
5 Amount of rain (in the above illustration, the rain amount in the last 24 hours)
6 Atmospheric tendency display
7 Graphic progress display (history) depending on the unit selected (illustration above: atmospheric pressure)
8 Sunrise time and sunset time
9 Time and date display
10 Animated icon "Weather Willie"
11 Current wind speed
12 Symbol for wind strength
13 Sensor number (no display when the combination sensor is selected)
14 Current air humidity value of the outdoor sensor selected
15 Current temperature value of the outdoor sensor selected
16 Symbol for the moon phase
17 Symbol for the weather forecast (sunny, fair, cloudy, rainy)
40
• Insert the rainfall sensor into its holder. It will hold the
count rocker firmly automatically.
Only one orientation is correct; the cable of the rain-
fall sensor and the magnet of the count rocker have
to be on the same side; the plastic nib on the other
side has to be inserted precisely into the holder, look
at the circle in the picture on the right.
• Place the cone collector from the top onto the sensor carrier and snap it in by turning it to the left.
• Push the lower part of the rain gauge housing upwards and lock it by turning it to the right until it snaps
in.
The drain holes in the lower part of the housing have to point to the outside so that the water does
not run on to the metal stands.
53